Loading ...
Loading ...
Loading ...
do not change this position while using the ve‐
hicle jack.◀
1. Hold the vehicle jack with one hand, ar‐
row 1, and grasp the vehicle jack crank
with your other hand, arrow 2.
2. Insert the vehicle jack into the rectangular
recess of the jacking point closest to the
wheel to be changed.
3. Extend the vehicle jack by turning the vehi‐
cle jack crank or lever clockwise.
4. Take your hand away from the vehicle jack
as soon as the vehicle jack is under load
and continue turning the vehicle jack crank
or lever with one hand.
5. Make sure that the vehicle jack foot is ex‐
tended vertically.
6. Make sure that the vehicle jack foot stands
vertically and perpendicularly beneath the
jacking point after extending the vehicle
jack.
7. Crank up the vehicle jack until the entire
surface of the jack is in contact with the
ground and the wheel in question is raised
a maximum of 1.2 inches/3 cm off the
ground.
Mounting a wheel
Mount one emergency wheel only, as required.
1.
Unscrew the lug bolts.
2. Remove the wheel.
3. Put the new wheel or emergency wheel on
and screw in at least two lug bolts in a
crosswise pattern until hand-tight.
If non-original light-alloy wheels of the ve‐
hicle manufacturer are mounted, the ac‐
companying lug bolts may have to be used
as well.
Seite 219
Wheels and tires Mobility
219
Online Edition for Part no. 01402981778 - VI/17
Loading ...
Loading ...
Loading ...