User Manual - Page 194

For X6 M 2018. Also, The document are for others BMW models: BMW X5 M

Loading ...
Loading ...
Loading ...
Condensation water under the parked
vehicle
When using the automatic climate control,
condensation water develops and collects un‐
derneath the vehicle.
Ground clearance
NOTE
If ground clearance is insufficient, there
might be contact with the front or rear spoiler,
e.g., when driving over curbs or entering into
underground vehicle parking garages. There is
a risk of property damage. Ensure that there is
sufficient ground clearance available.◀
M Driver's Package: driving in the
higher speed range
WARNING
Damage to vehicle components can neg‐
atively impact the driving performance at high
speeds. This includes, among other things
tires, underbody and parts for improving aero‐
dynamics. There is a risk of an accident. Have
damage corrected by a dealer’s service center
or another qualified service center or repair
shop. Do not drive at high speeds until the
damage is corrected.◀
Driving on poor roads
Concept
Because of its greater ground clearance, the
vehicle can be driven on a variety of road types
and qualities.
All-wheel drive can help improve forward mo‐
mentum.
Safety information
NOTE
Objects in unpaved areas, e.g., stones or
branches, can damage the vehicle. There is a
risk of property damage. Do not drive on un‐
paved terrain.◀
When driving on poor roads
For your own safety, for the safety of passen‐
gers and of the vehicle, heed the following
points:
Become familiar with the vehicle before
starting a trip; do not take risks while driv‐
ing.
Adjust the speed to the road surface con‐
ditions. The steeper and more uneven the
road surface, the slower the speed should
be.
When driving on steep uphill or downhill
grades: add engine oil and coolant up to
near the MAX mark. Uphill and downhill
grades can be traveled up to no more than
50 %.
On steep downhill grades, use Hill Descent
Control HDC.
Starting out is possible on uphill grades up
to 32 %. The permissible side tilt is 50 %.
Avoid that the chassis bottom coming in
contact with the ground.
The ground clearance is no more than
7.8 inches/20 cm and can vary according
to the vehicle's load.
When wheels continue to spin, depress the
accelerator so that driving stability control
systems can distribute the driving force to
the wheels. Activate DTC Dynamic Trac‐
tion Control if available.
After a trip on poor roads
After a trip on poor roads, check wheels and
tires for damage to maintain driving safety.
Clear heavy soiling from the body.
Seite 194
Driving tips Things to remember when driving
194
Online Edition for Part no. 01402981778 - VI/17
Loading ...
Loading ...
Loading ...