Loading ...
Loading ...
Loading ...
Switching on/off
Press button.
Air flows out of the vents to the upper body re‐
gion. The vents need to be open for this.
The air flow can be adjusted with the air flow
active.
AUTO program
Concept
Air flow, air distribution and temperature are
controlled automatically.
Switching on/off
Press button.
Depending on the selected tempera‐
ture, the intensity of the AUTO program, and
outside influences, the air is directed to the
windshield, side windows, upper body, and
into the floor area.
The air conditioning, refer to page 166, is
switched on automatically with the AUTO pro‐
gram.
At the same time, a condensation sensor con‐
trols the program so as to prevent window
condensation as much as possible.
Intensity
With the AUTO program switched on, the in‐
tensity can be set. This changes the automatic
control for the air flow and air distribution.
Press the left or right side of the but‐
ton: decrease or increase intensity.
The selected intensity is shown on the display
of the automatic climate control.
Automatic recirculated-air control/
recirculated-air mode
Concept
The automatic recirculated-air control AUC
detects odors or pollutants in the outside air.
The outside air supply is shut off and the inte‐
rior air is recirculated.
General information
If the system is activated, a sensor detects pol‐
lutants in the outside air and controls the shut-
off automatically.
If the system is deactivated, outside air contin‐
uously flows into the car's interior.
With constant recirculated-air mode, the air
quality in the car's interior deteriorates and the
fogging of the windows increases.
Switching on/off
Press button repeatedly to select an
operating mode:
▷ LEDs off: outside air flows in continuously.
▷ Left LED on, automatic recirculated-air
control: a sensor detects pollutants in the
outside air and shuts off automatically.
▷ Right LED on, recirculated-air mode: the
supply of outside air into the vehicle is per‐
manently blocked.
If the windows are fogged over, switch off the
recirculated-air mode and press the AUTO
button on the driver's side to utilize the con‐
densation sensor. Make sure that air can flow
to the windshield.
Controlling the air flow manually
Concept
The air flow for climate control can be adjusted
manually.
Seite 167
Climate control Controls
167
Online Edition for Part no. 01402981778 - VI/17
Loading ...
Loading ...
Loading ...