Loading ...
Loading ...
Loading ...
1. Grasp folded-up cargo cover under the top
fold on both sides.
2. Pull the cover rearward out of the two side
brackets.
Installing
When installing, follow the reverse procedure.
1.
Put the cargo cover in place left and right.
2. Lift the cover slightly to the rear and push
toward the front until it engages on both
side brackets.
BMW X5 M: cargo area partition net
Safety information
WARNING
If the cargo net snaps back, it can cause
injuries or damage. There is risk of injuries or
risk of property damage. Do not let the cargo
area partition net snap back into place.◀
Hooking in
1.
Fold open the rear covers on the roofliner.
2. Pull the cargo area partition net out of the
case by the strap.
3. Insert the bars into the brackets on both
sides in the roofliner, arrows.
Lowering
1.
Hold the rod on both side and release it
from the brackets.
2. Slowly slide the cargo area partition net
into the case.
Enlarging the cargo area
Concept
The cargo area can be enlarged by folding
down the rear seat backrest.
General information
The rear seat backrest is divided at a ratio of
40–20–40. The side rear seat backrests and
the center section can be folded down sepa‐
rately.
The rear seat backrests can be folded down
from the rear.
Safety information
WARNING
Danger of jamming with folding down the
backrests. There is a risk of injury or risk of
property damage. Make sure that the area of
movement of the rear backrest and the of the
head restraint is clear prior to folding down.◀
WARNING
If a rear seat backrest is not locked, un‐
secured cargo can be thrown into the car's in‐
terior, for instance in case of an accident, brak‐
Seite 180
Controls Interior equipment
180
Online Edition for Part no. 01402981778 - VI/17
Loading ...
Loading ...
Loading ...