Loading ...
Loading ...
Loading ...
Child safety 53
Safety First Operating instructions Tips and Maintenance Technical Data
– Pull the loop in the direction of the arrow and push the seat
cushion down until it engages.
Fitting the slumber roll
– Remove the head restraint.
– Fit the head restaint onto the slumber roll
– Reinsert the head restraint and push down until it can be heard
to engage.
Removing the slumber roll
– Remove the head restraint.
– Pull the slumber roll off the head restraint.
– Reinsert the head restraint and push down until it can be heard
to engage.
For safety reasons, we recommend that the child seat for children in Group 1
is installed facing against the direction of travel.
Adjusting the belt routing for larger children in Group1
A correctly adjusted seat belt helps to protect your child!
–Pull the upper part ⇒ fig. 36 of the support off the Velcro
fasteners to the front.
– For larger children, guide the two shoulder belts in the side slots
to the upper position .
–Then push the support under the belts and secure it ⇒ .
For smaller children, guide the two belts in the side slots to the lower position
.
WARNING
The support ⇒ fig. 36 must be pressed onto the seat in the area of the
Velcro fastener in such a way that the belts can move freely in the slots.
A
1
Fig. 36 Section of the
integrated child seat:
Adjusting the belt routing
A
A
A
6
A
A
A
7
A
A
Alhambra angles Seite 53 Donnerstag, 13. Oktober 2005 12:56 12
Loading ...
Loading ...
Loading ...