Loading ...
Loading ...
Loading ...
If and when 245
Safety First Operating instructions Tips and Maintenance Technical Data
– Remove the broken glass bulb and replace with a new bulb.
– Insert the lamp holder in the turn signal guide rail.
– First fit the turn signal in the opening of the chassis, securing the
tabs ⇒ page 244, fig. 164 and then, fit the lamp as shown by
the arrow .
Rear lights
Before changing a bulb, the tailgate should always be opened.
The lights have the following layout:
On the body
Turn signals, pilot light and brake/rear light
On the tailgate / rear door
Reversing light and rear antifog light.
Lights on vehicle body
– Open the cover in the luggage compartment trim.
– Press the side tabs in the direction of arrow ⇒ fig. 165.
– Press the defective bulb into the bulb carrier, then turn it to the
left and remove it.
– Fit the new bulb and turn to the right as far as possible.
– Fit the lampholder, press in until the tabs “click” into place.
A
1
A
2
Fig. 165 Lights on
vehicle body
Alhambra angles Seite 245 Donnerstag, 13. Oktober 2005 12:56 12
Loading ...
Loading ...
Loading ...