Loading ...
Loading ...
Loading ...
51
Convenient Projection Features
Basic Guide Convenient Projection Features
Projecting a Test Pattern from the Menu
Even without any input signals, the projector can project a test pattern. Test
patterns can be projected during installation to check how the projector is installed.
For details on projecting test patterns, see “Test pattern” (P152) or “Adjustment
Using a Test Pattern” (P105).
Specifying Power-Saving Settings
Set power-saving settings as needed.
The following four settings are available. For details, refer to the page describing
each function.
• Lamp mode (P141)
Adjust lamp and fan power consumption in the image mode.
• Standby power settings (P162)
Conserves energy in standby mode by disabling some network functions.
• Power management mode (P162)
Automatically turns off the lamp or the power after a certain period if the projector
is idle without an input signal.
• Power management duration (P163)
Specify the period after which the lamp or the projector should go off
automatically if left idle without an input signal when [Power management mode]
is set to [Light source off] or [Standby].
Loading ...
Loading ...
Loading ...