Loading ...
Loading ...
Loading ...
49
Projection Procedure
Basic Guide Projection Procedure
3 As you view the test pattern, perform [Gamma] (P136) adjustment from
the [Image adjustment] menu until the image is optimal.
4 Press the OK button after the setting.
Turn the Projector Off
1 Press the POWER button.
2 When this window is displayed,
press the POWER button again.
After you turn the power off, the
projector will enter standby mode
once it cools down.
Perform one of the followings to obtain an appropriate projection:
• Darken the ambient light
• Reduce the image size
• Reduce the projection distance
• If you want to continue projecting without turning off the power, press a button other
than POWER, or else wait until the confirmation message disappears.
• After turning off the projector, wait at least 5 minutes before turning it on again. It may
shorten the lamp life if you turn on the projector immediately after turning it off.
• Using the projector for extended periods may shorten the life of the lamp and internal
optical components.
• Unplug the projector if it will not be used for an extended period. Note that the [Date
and time] setting will be reset, so you will need to set it again.
• In power management mode, the projector may go off automatically after some time
(P162).
Remote control
Projector
Loading ...
Loading ...
Loading ...