Loading ...
Loading ...
Loading ...
Function
26
Using Digital Zoom Function
Adjusting the Zoom
Adjusting the Position
* This function is available only in RGB input mode.The Zoom -/+and Position values return to their defaults when
you change the SOURCE or input signal,or turn the power off.
1. Press the ZOOM button on the remote control.
2. Press the
, button to select Zoom -/+ item.
1. Press the ZOOM button on the remote control.
2. Press the , button to select Position item.
Zoom -/+
Position
Reset
100 %
MENU Prev. Move Select
Zoom -/+
Position
Reset
110 %
MENU Prev. Move OK
Press OK to Start
3. Press the , button to adjust Zoom -/+ to your
choice.
●
You can adjust Zoom -/+ in 5%increments from 100%to
250%.
●
You can also use this function by using the MENU button.
●
Press the EXIT button to exit the menu screen.
3. Press the OK button. When the window below appears
at the bottom right corner of the screen, press the
//
Ë to adjust the position. When the arrow turns black,
maximum adjustment has been reached and no further
adjustment can be made.
●
Position is activated only when Zoom --/+is set to more
than 105%.
●
You can also use this function by using the MENU button.
●
Press the EXIT button to exit the menu screen.
Prev.
Loading ...
Loading ...
Loading ...