BX501B
OWNER’S MANUAL
LG DLP PROJECTOR
LG DLP PROJECTOR
Please read this manual carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the bottom of the set and
quote this information to your dealer when you
require service.
Model number :
Serial number :
DLP PROJECTOR
DLP PROJECTOR
Warning
This is a class A product. In a domestic environment this product may cause radio interference, in
which case the user may be required to take adequate measures.
Contents
3
Contents
Safety Instructions....................................4
Names of parts
Main Body .......................................................7
Connecting Part ..............................................7
Control Panel ..................................................8
Remote Control...............................................9
Installing Batteries...........................................9
Projector Status Indicators..............................10
Accessories.....................................................11
Optional Extras ...............................................11
Installing and Composition
Installation Instructions ...................................12
Basic Operation of the Projector.....................13
Using Kensington Security System.................14
Turning on the Projector .................................15
Turning off the Projector .................................15
Focus and Position of the Screen Image........16
Selecting source mode ...................................16
Connection
Connecting to a Desktop PC ..........................17
Connecting to a Notebook PC ........................17
Connecting to a Video Source ........................17
Connecting to a DVD ......................................18
Connecting to a D-TV Set-Top Box ................18
Function
Video Menu Options
Adjusting Video ...............................................19
Picture mode...................................................19
Color Temperature Control..............................20
Gamma Function ............................................20
Gamma curve shift Function...........................20
Brilliant color
TM
Function ................................21
White peaking Function ..................................21
Black level Function ........................................21
Expert color Function ......................................22
Reset...............................................................22
Special Menu Options
Selecting Language ........................................23
Using Aspect Ratio Function...........................23
Overscan Function..........................................23
Flip horizontal Function...................................24
Flip vertical Function .......................................24
Sleep time Function ........................................24
Auto sleep Function ........................................25
Presentation timer Function ............................25
Using Digital Zoom Function...........................26
Using Keystone Function ................................27
Using Blank Function ......................................27
Selecting Blank image color ...........................28
Captured Image Function ...............................28
Lamp mode Function ......................................28
Using Monitor out Function.............................29
Checking lamp time ........................................29
Using Still Function .........................................29
Screen Menu Options
Auto configure Function ..................................30
Using Phase Function.....................................30
Using Clock Function ......................................30
Using Horizontal Function...............................31
Using Vertical Function ...................................31
RS-232C
External Control Device Setup........................32
Information
Supported Monitor Display..............................37
Maintenance....................................................37
Replacing the Lamp ........................................38
How to fix the lens cap to the projector ..........40
Specifications ..................................................41
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance,
please contact your city office, waste disposal service or the shop
where you purchased the product.
Safety Instructions
4
Safety Instructions
Please take note of the safety instructions to prevent any potential accident or misuse of the projector.
➟ Safety Instructions are given in two forms as detailed below.
WARNING : The violation of this instruction may cause serious injuries and even death.
NOTES : The violation of this instruction may cause light injuries or damage to the projector.
➟
After reading this manual, keep it in the place that the user always can contact easily.
Indoor Installation WARNING
Do not place the Projector in direct
sunlight or near heat sources such
as radiators, fires and stove etc.
This may cause a fire hazard !
Do not place inflammable materi-
als beside the projector
This may cause a fire hazard !
Do not allow children to hang on
the installed projector.
It may cause the projector to fall, caus-
ing injury or death.
Outdoor Installation WARNING
Do not use the projector in a damp place such as a bathroom where it is likely to get wet.
This may cause a fire or an electric shock hazard !
Power WARNING
Indoor Installation NOTES
Disconnect from the mains and
remove all connections before
moving.
Do not place the projector close
to sources of steam or oil such
as a humidifier.
This may create a fire hazard or an
electric shock hazard !
Do not place the projector where
it might be exposed to dust.
This may cause a fire hazard or
damage to the unit!
Earth wire should be connected.
If the earth wire is not connected, there is a
possible danger of electric shock caused by
the current leakage.
If grounding methods are not possible, a
separate circuit breaker should be installed
by a qualified electrician.
Do not connect ground to telephone wires,
lightning rods or gas pipe.
The mains plug should be inserted
fully into the power outlet to avoid a
fire hazard !
This may cause a fire hazard or damage
the unit.
Do not place heavy objects on
the power cord.
This may cause a fire or an electric
shock hazard !
Do not block the vents of the pro-
jector or restrict air-flow in any way.
This would cause the internal tempera-
ture to increase and could cause a fire
hazard or damage to the unit!
Do not place the projector directly on a carpet, rug or place where
ventilation is restricted.
This would cause its internal temperature to increase and might create a fire
hazard or damage the unit.
When installing the projector on a
table, be careful not to place it
near the edge.
This may cause the projector to fall
causing serious injury to a child or
adult and serious damage to the
projector.
Only use a suitable stand.
Only use the projector on a level
and stable surface.
It may fall and cause injury and/or
damage to the unit.
Ensure good ventilation around the
projector. The distance between
the projector and the wall should
be more than 30cm/12 inches.
An excessive increase in its internal
temperature may cause a fire hazard or
damage to the unit!
Safety Instructions
5
Using WARNING
Do not place anything containing
liquid on top of the projector such
as flowerpot, cup, cosmetics or
candle.
This may cause a fire hazard or
damage to the unit!
In case of impact shock or damage
to the projector switch it off and
unplug it from the mains outlet and
contact your service center.
This may cause a fire or an electric
shock hazard or damage to the unit!
Do not allow any objects to fall
into the projector.
This may cause an electric shock
hazard or damage to the unit!
If water is spilt into the projector
unplug it from the mains supply
outlet immediately and consult
your Service Agent.
This may cause an electric shock
hazard or damage to the unit!
Dispose of used batteries care-
fully and safely.
In the case of a battery being
swallowed by a child please consult a
doctor immediately.
In the event that an image does
not appear on the screen please
switch it off and unplug it from
the mains supply and contact
your Service Agent.
This may cause a fire or an electric
shock hazard or damage to the unit!
Do not remove any covers
(except lens cover). High risk of
Electric Shock!
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit; that is,a single outlet circuit which
powers only that appliance and has no additional outlets or branch circuits.Check the specification page
of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets,loose or damaged wall outlets, extension cords,
frayed power cords,or damaged or cracked wire insulation are dangerous.Any of these conditions could
result in electric shock or fire. Periodically examine the cord of your appliance,and if its appearance indi-
cates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced
with an exact replacement part by an authorized service personnel.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the
cord exits the appliance.
Don’t look directly onto the lens
when the projector is in use. Eye
damage may occur!
Do not touch metal parts during or
soon after operation since the
vents and lamp cover will remain
very hot!
Power WARNING
Do not use too many plugs on the Mains multi-outlet.
It may result in overheating of the outlet and causes a fire hazard !
Power NOTES
Never touch the power plug with
a wet hand
This may cause an electric shock
hazard !
Hold the plug firmly when unplug-
ging. If you pull the cord, it may
be damaged.
This may cause a fire hazard !
Prevent dust collecting on the
power plug pins or outlet.
This may cause a fire hazard !
Do not plug when the power cord
or the plug is damaged or any
part of the power outlet is loose.
This may cause a fire or an electric
shock hazard or damage to the unit!
Ensure the power cord does not
come into contact with sharp or
hot objects such as a heater.
This may cause a fire or an electric
shock hazard or damage to the unit!
Place the projector where people
will not trip or tread on the power
lead.
This may cause a fire or an electric
shock hazard or damage to the unit!
Do not turn the projector On/Off by plugging-in or unplugging the power plug to the wall outlet.
(Do not use the power plug for switch.)
It may cause mechanical failure or could cause an electric shock.
Safety Instructions
6
Using NOTES
Do not place heavy objects on
top of projector.
This may cause mechanical failure or
personal injury!
Take care not to impact the lens
particularly when moving the
projector.
Do not touch the lens of the pro-
jector. It is delicate and easily
damaged.
Others NOTES
Be sure to unplug if the projector
is not to be used for a long peri-
od.
Accumulated dust may cause a fire
hazard or damage to the unit!
Refer lamp servicing to qualified
service personnel.
Do not mix new batteries with old
batteries.
This may cause the batteries to over-
heat and leak.
Cleaning NOTES
Contact the Service
Center once a year to
clean the internal
parts of the projector.
Accumulated dust can
cause mechanical failure.
When cleaning the plastic parts such as projector case, unplug the power and
wipe it with a soft cloth. Do not use cleanser, spray water or wipe with a wet
cloth. Especially, never use cleanser (glass cleaner), automobile or industrial
shiner, abrasive or wax, benzene, alcohol etc., which can damage the
product. Use an air spray or soft cloth that is moist with a neutral detergent
and water for removing dust or stains on the projection lens.
It can cause fire, electric shock or product damage (deformation, corrosion and damage).
Do not use any sharp tools on the projector as this will damage the casing.
Cleaning WARNING
Do not use water while cleaning
the projector
This may cause damage to the
projector or an electric shock hazard.
In the unlikely event of smoke or
a strange smell from the projector,
switch it off , unplug it from the
wall outlet and contact your
dealer or service centre.
This may cause a fire or an electric
shock hazard or damage to the unit!
Use an air spray or soft cloth that
is moist with a neutral detergent
and water for removing dust or
stains on the projection lens.
Others WARNING
Do not attempt to service the projector yourself. Contact your dealer or service centre.
This may cause damage to the projector and could give an electric Shock as well as invalidating the warranty !
Only use the specified type of battery.
This could cause damage to the remote control.
Never touch the wall outlet when
there is leakage of gas, open the
windows and ventilate.
It can cause a fire or a burn by a
spark.
Do not drop the projector or allow
impact shock.
This may cause mechanical failure or
personal injury !
Don’t look at laser beam directly
as it can cause eye damage!
Using WARNING
Always open the lens door or remove the lens cap when the projector lamp is on.
Names of parts
7
Names of parts
Main Body
Connecting Part
Front remote control sensor
Power button
Foot adjusting button
Rear remote
control sensor
Control panel
*
The projector is manufactured using high-precision technology. You may, however, see on the Projector
screen tiny black points and/or bright points (red, blue, or green). This can be a normal result of the
manufacturing process and does not always indicate a malfunction.
Focus ring
Zoom ring
RS-232C
S-Video
USB(SVC Only)
RGB IN-1
RGB IN-2
Video
AC IN
Kensington Security
System Connector
(Refer to page 14)
RGB OUT
HDMI IN
Names of parts
8
Control Panel
AUTO
SOURCE
POWER
MENU
OK
POWER Button
Turn ON/OFF the projector.
MENU Button
Selects or closes menus.
AUTO Button
It automatically corrects the
position and the shaking of the
image at the RGB mode.
SOURCE Button
Switches to RGB(Component),
HDMI, Video, S-Video mode.
OK Button
Checks present mode and saves the function
changes.
/ / / Button
Adjusts functions of menus.
Names of parts
9
Remote Control
Installing Batteries
POWER
MENU
SOURCE
EXIT
AUTO
STILL
OK
LASER
RATIO
ZOOM
MODE
TIMER
BLANK
W.PEAK
KEYSTONE
GAMMA
POWER Button
SOURCE Button
OK Button
Brightness Button
Contrast Button
EXIT Button
LASER Button
/ / / Button
• Open the battery compartment cover on the back of the remote control.
• Insert the specified type of batteries with correct polarity, match “+” with “+”, and
match “-” with “-”.
• Install two 1.5V AAA batteries. Don’t mix used batteries with new batteries.
MENU Button
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED WITH AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Laser Button
* Produces a bright red laser pointer on the
screen for the purpose of indication.
(Don’t look at laser beam directly as it
can cause eye damage!)
AUTO Button
ZOOM Button
RATIO Button
MODE Button
BLANK Button
KEYSTONE Button
GAMMA Button
STILL Button
TIMER Button
W.PEAK Button
Names of parts
10
* Lamp indicator, operation indicator and temperature indicator at the top of the projector show the user the operating status
of the projector.
Lamp Indicator
Temperature Indicator
Operation Indicator
Projector Status Indicators
Operation Indicator
Lamp Indicator
Temperature Indicator
Red
Green(flashing)
Green
Orange(flashing)
Off
Orange
Red(flashing)
Red
Red(flashing)
Green(flashing)
Orange
Red
Red (flashing)
Green(flashing)
Standby.
Lamp is starting up.
Unit is in operation (Lamp is turned on)
Projector lamp is cooling (10 sec.)
Power off.
Standby-This mode cools the projector naturally for 4
minutes after it is turned off.
This indicates a Colour Wheel problem.Please contact
your local service centre.
Projector lamp is reaching the end of its life and needs
to be replaced with a new lamp.
The projector is experiencing an error. Retry Power On
again later. If lamp indicator is red (flashing) again, con-
tact the service center.
The lamp cover is open.
A high temperature state has been detected. Turn the
Projector off.
The Projector has turned off due to excessive heat.
Power has turned off due to problem with the internal
cooling fan. Contact your service center.
This indicates a TEC problem.Please contact your local
service centre.
Names of parts
11
Accessories
Optional Extras
POWER
MENU
SOURCE
EXIT
AUTO
STILL
OK
LASER
RATIO
ZOOM
MODE
TIMER
BLANK
W.PEAK
KEYSTONE
GAMMA
* Contact your dealer to purchase these items.
* Contact your service personnel for replacing of lamp.
* The lamp is consumable and needs to be replaced with a new one when it is burned out.
* Optional parts can be changed without notice to improve the quality of the product, and new optional parts can be added.
Remote Control
Power Cord
Video Cable
Owner’s manual
Computer Cable
Lamp
S-Video Cable
Projection Screen
1.5V
1.5V
2 Batteries
Ceiling installer for projector
Component Cable
CD Owner’s manual
Lens cap and Strap
RS-232C Cable
RCA to D-Sub Adapter
Polishing Cloth
HDMI Cable
USB A-B type Cable
Installing and Composition
12
Installing and Composition
Provide proper ventilation for this projector.
●
The projector is equipped with ventilation holes(intake)
on the bottom and ventilation holes(exhaust) on the front.
Do not block or place anything near these holes, or inter-
nal heat build-up may occur, causing picture degradation
or damage to the projector.
Place this projector in adequate temperature and humidity conditions.
●
Install this projector only in a location where adequate temperature and humidity is available. (refer page 41)
● Do not place the projector on a carpet, rug or other
similar surface. It may prevent a adequate ventila-
tion of the projector bottom. This product should be
mounted to a wall or ceiling only.
*
Don’t place the projector in the following conditions. It may cause malfunction or product damage.
● Never push projector or spill any kind of liquid into the
projector.
● Leave an adequate distance(30cm/12 inches or
more) around the projector.
Don’t place the projector where it can be covered with dust.
●
This may cause overheating of the projector.
Do not obstruct the slots and openings of the projector. This may cause overheating and create a fire
hazard.
The projector is manufactured using high-precision technology. You may, however, see tiny black points
and/or bright points (red, blue, or green) that continuously appear on the projector Screen. This is a nor-
mal result of the manufacturing process and does not indicate a malfunction.
To display DTV programs, it is necessary to purchase a DTV receiver (Set-top Box) and connect it to the
projector.
Installation Instructions
When the remote control does not work during operation.
●
The remote control may not work when a lamp equipped with electronic ballast or a three-wavelength lamp is installed.
Replace those lamps with international standard products to use the remote control normally.
Installing and Composition
13
1.Place the projector on a sturdy and horizontal surface with the PC or AV source.
2.Place the projector with the desired distance from the screen. The distance between the projector and the screen
determines the actual size of the image.
3.Position the projector so that the lens is set at a right angle to the screen. If the projector is not set at a right angle, the
screen image will be crooked. If this is so then the keystone adjustment may correct this (Refer to page 27.)
4.Connect the cables of the projector to a wall power socket and other connected sources.
projection distance based on the picture format
Projection distance (D)
Projection off-set ratio:100%
100mm
Projection distance (D)
Basic Operation of the Projector
* The longest/shortest distance
show status when adjusted by
the zoom function.
Screen
Screen height (X)
X/2
X/2
Y/2
Y/2
Screen
Screen Width (Y)
4 : 3 Scale
Image
Projection Distance
Diagonal Size
(inch)
Diagonal Size
(mm)
Horizontal Size
(mm)
Vertical Size
(mm)
Wide Distance
(mm)
Tele Distance
(mm)
Installing and Composition
14
●
The projector has a ‘Kensington’ Security System Connector on the side panel. Connect the ‘Kensington’ Security
System cable as below.
●
For the detailed installation and use of the Kensington Security System, refer to the user’s guide attached to
the Kensington Security System set.
And for further information, contact http://www.kensington.com, the internet homepage of the Kensington
company that deals with expensive electronic equipment such as notebook PCs or projectors.
●
Kensington Security System is an optional item.
Using Kensington Security System
Installing and Composition
15
* Do not disconnect the power cord during the suction/discharge fan in operation. If the power cord is disconnected during the
suction/ discharge fan in operation, it may takes longer to activate the lamp after turning on the power and the lifespan of the
lamp may be shortened.
Turning on the Projector
Turning off the Projector
1. Connect power cord correctly.
2. Remove the lens cap. If it is left on, it could become deformed due to the heat produced by
the projection lamp.
3. Press the POWER button on the remote control or top cover.
(Green operation indicator flashes if lamp is in start-up cycle.)
●
An image will appear after the operation indicator light turns (Green).
●
Select the source mode with the SOURCE button.
1.Press the POWER button on the top cover or remote control.
2.Press the POWER button on the top cover or remote control again to turn off the power.
3.If the operation indicator LED is orange and blinking, do not disconnect(10 sec.) the supply until
the operation indicator LED is lit constantly (orange).
● If the operation indicator LED is orange and blinking, the power button on the top cover or on the remote control will not
operate.
● This projector features the Quick Power On/Off function that allows a user to turn it on and off quickly.
Power off?
Please press Power key again.
* What is the Quick Power On/Off function?
The projector enters into Standby mode without waiting it is cooled.
If Standby mode continues for a certain amount of time, the projector can operate without cooling when it is turned on.
Installing and Composition
16
1. While pressing the foot adjusting button, raise or lower the projector to place the screen image in the proper position.
2. Release the button to lock the foot in its new position.
3. Turn the foot at the back left or right to make a fine tune of the length of the projector.
After raising the front foot, do not press down on the projector.
When an image appears on the screen, check if it is in focus and fits well to the screen.
● To adjust the focus of the image, rotate the focus ring which is the outer ring on the lens.
● To adjust the size of the image, rotate the zoom ring which is the inner ring on the lens.
Focus ring
Zoom ring
Focus and Position of the Screen Image
Selecting source mode
1. Press the SOURCE button on the remote control or the control panel.
2. Each press of the , button changes the display as below.
To raise or lower the image on the screen, extend or retract the foot at the bottom of the projector
by pushing foot adjusting button as below.
RGB1 RGB2
HDMIS-Video Video
RGB1
Select OK
Connection
17
Connection
Connecting to a Desktop PC
* You can connect the projector to a computer of VGA, SVGA, XGA and SXGA output.
* Refer to page 37 for the supported monitor displays of the projector.
* You can select an RGB input from the Monitor Out menu that will be output to RGB OUT(RGB1 or RGB2).
< How to connect >
Connect the RCB IN-1 of the projector and the computer output
port with computer cable.
* You can also connect to the RGB IN-2 port.
Connecting to a Notebook PC
< How to connect >
Connect the RCB IN-1 of the projector and the computer output
port with computer cable.
* If you set your computer to output the signal to both the display
of your computer and the external projector, the picture of the
external projector may not appear properly. In such cases, set
the output mode of your computer to output the signal only to
the external projector. For details, refer to the operating instruc-
tions supplied with your computer.
* You can also connect to the RGB IN-2 port.
Connecting to a Video Source
< How to connect 1 >
a. Connect the Video input jacks of the projector to the output
jacks of the A/V source with Video cable.
< How to connect 2 >
b. Connect the S-Video input jack of the projector to the
S-Video output jack of an A/V source with an S-Video cable.
* You can get better picture quality when connecting
S-Video source to the projector.
S VIDEO
(R) AUDIO (L) VIDEO
OUT
IN
* You can connect a VTR, a camcorder or any other compatible video image source to the projector.
<VCR>
Connection
18
Connecting to a DVD
< How to connect >
a. Connect the DVD Component cable to the RCA to D-Sub
Adapter and then connect the RCA to D-Sub Adapter to
RGB IN-1 of the projector.
* When connecting the component cable, match the jack colors
with the component cable.(Y=green, PB=blue, PR
=red)
* You can also connect to the RGB IN-2 port.
PR
PB
Y
(R) AUDIO (L)
* The output jacks (Y, PB, PR) of the DVD might be labeled as Y, Pb, Pr / Y, B-Y, R-Y / Y, Cb, Cr according to the equipment.
<DVD>
Component cable
HDMI Cable
Connecting to a D-TV Set-Top Box
< How to connect a HDMI source >
a. Connect the HDMI IN terminal of the projector to the HDMI
output terminal of the D-TV Set-Top Box via HDMI cable.
b. Use a DTV receiver with DTV 480p(576p)/720p/1080i mode.
(R) AUDIO (L)
DTV OUTPUT
DVI OUTPUT
PR
PB
Y
HDMI OUTPUT
* To receive D-TV programmes, it is necessary to purchase a D-TV receiver (Set-Top Box) and connect it to the projector.
* Please refer to the owner's manual of the D-TV Set-Top Box for the connection between projector and D-TV Set-Top Box.
Component cable
< How to connect a Component source >
a. Connect the D-TV Set-Top Box Component cable to the
RCA to D-Sub Adapter and then connect the RCA to D-
Sub Adapter to RGB IN-1 of the projector.
* When connecting the component cable, match the jack colors
with the component cable.(Y=green, P
B=blue, PR=red)
* You can also connect to the RGB IN-2 port.
(R) AUDIO (L)
DTV OUTPUT
DVI OUTPUT
PR
PB
Y
HDMI OUTPUT
Signal
480i
480p
720p
1080i
576i
576p
Component
O
O
O
O
O
O
HDMI/DVI
X
O
O
O
X
O
<D-TV Set-Top Box>
<D-TV Set-Top Box>
RCA to D-Sub adapter
RCA to D-Sub adapter
Function
19
Function
Video Menu Options
* In this manual, the OSD(On Screen Display) may be different from your Projector’s because it is just an example to
help with the Projector operation.
* This operating guide explains operation of RGB(PC) mode mainly.
1. Press the MENU button and then use , button to select the menu.
2. Press the
, button to select a video item you want to adjust.
3. Press the , button to adjust the screen condition as you want.
< RGB mode >
< Video mode >
●
Each adjustment of menu options will not affect other inputs.
●
When receiving an NTSC signal, the picture item Tint is displayed and can
be adjusted.(60Hz only)
●
You can adjust contrast by pressing the button on the remote control.
●
You can adjust brightness by pressing the button on the remote control.
●
Press the MENU button twice or the EXIT button to exit the menu screen.
Adjusting Video
1. Press the MODE button on the remote control.
2. Press the
, button to adjust the screen condition as you want.
Picture mode
* Use Picture mode function to set the projector for the best picture appearance.
●
Each press of the , button changes the screen as shown below.
●
You can use this function through the MENU button.
●
To exit the menu display, press the EXIT button.
Picture mode
Contrast 50
Brightness 50
Color R 50
Color G 50
Color B 50
Normal
MENU Exit Move OK
Picture mode
Contrast 80
Brightness 50
Color 50
Sharpness 50
Tint 0
Normal
MENU Exit Move OK
Normal
Presentation
Sports
User
Film
Bright
Golf
Game
Function
20
1. Press the MENU button and then use , button to select the menu.
2. Press the
,
button to select
Color temp. item.
3. Press the
, button to make desired adjustments.
Color Temperature Control
●
Each press of the , button changes the screen as shown below.
●
This function can be inactivated depends on the Picture mode. When the Picture mode
is set in Bright or Golf, you can’t adjust Color temperature function.
●
Press the MENU button twice or the EXIT button to exit the menu screen.
Medium Warm Natural
- To initialize values (reset to default settings), select the Natural option.
1. Press the GAMMA button on the remote control.
2. Press the
, button to select the screen condition you want.
Gamma Function
●
Each press of the , button changes the screen as shown below.
●
You can use this function through the MENU button.
●
To exit the menu display, press the EXIT button.
1. Press the MENU button and then use
, button to select the menu.
2. Press the
, button to select
Gamma curve shift item.
3. Press the OK button.
4. When the window below appears, press
, button to move between the
items and the
, buttons to adjust the screen as you want.
●
Gamma curve shift Red, Green, Blue can be adjusted between -20 and 20.
●
Press the MENU button twice or the EXIT button to exit the menu screen.
Gamma curve shift Function
- This function shifts the gamma curves for Red, Green and Blue individually to
adjust brightness.
Cool
Color temp.
Gamma
Gamma curve shift
Brilliant color
TM
White peaking 10
Black level
Expert Color
Reset
Natural
Normal
On
Low
MENU Prev. Move Select
Color temp.
Gamma
Gamma curve shift
Brilliant color
TM
White peaking 10
Black level
Expert Color
Reset
Natural
Normal
On
Low
Middle
High
Maximum
Low
Cinema
Gamma Curve Shift Red 0
Gamma Curve Shift Green 0
Gamma Curve Shift Blue 0
Reset
Prev. Move Adjust
MENU Prev. Move OK
Press OK Key
Function
21
1. Press the W.PEAK button on the remote control.
2. Press the
, button to select the screen condition you want.
●
The default value may change depending on input mode.
●
White peaking can be adjusted from 0 to 10.
●
Adjust to higher setting to achieve brighter picture. Adjust to lower setting for dark-
er picture.
●
You can use this function through the MENU button.
●
To exit the menu display press the EXIT button.
White peaking Function
1. Press the MENU button and then use , button to select the menu.
2. Press the
, button to select Brilliant color
TM
item.
3. Press the
, button to select On or Off.
●
Press the MENU button twice or the EXIT button to exit the menu screen.
* What is the Brilliant color
TM
function?
This function increases the entire brightness of the screen or decreases it a little to make
the rich grayscale color.
Brilliant color
TM
Function
1. Press the MENU button and then use , button to select the menu.
2. Press the
, button to select Black level item.
3. Press the
, button to select Low or High.
●
This function works in the following mode : HDMI(Only activates in DTV signal),
Video, S-Video
●
To exit the menu display, repeatedly press the MENU button.
* What is the Black level function?
When you watch the movie, this function adjusts the set to the best picture
appearance. Adjusting the contrast and the brightness of the screen using the
black level of the screen.
Black level Function
Color temp.
Gamma
Gamma curve shift
Brilliant color
TM
White peaking 10
Black level
Expert Color
Reset
Natural
Normal
On
Low
MENU Prev. Move Select
Color temp.
Gamma
Gamma curve shift
Brilliant color
TM
White peaking 10
Black level
Expert Color
Reset
Natural
Normal
On
Low
MENU Prev. Move Select
White peaking 10
Exit Adjust
Function
22
1. Press the MENU button and then use ,
button to select the menu.
2. Press the ,
button to select
Expert Color item.
3. Press the OK button.
Expert color Function
●
To return to the factory default settings, select [Reset] with , buttons and press OK button.
Reset
- This function allows a user to adjust the Gain, Saturation and Hue for Red,
Green, Blue, Cyan, Magenta and Yellow individually.
Color temp.
Smart picture
Gamma curve shift
Brilliant color
TM
White peaking 10
Black level
Expert Color
Reset
FG
Natural
FG
Normal
FG
On
FG
High
Press OK Key
4. When the window above appears, press
, button.
5. Press the or button to move between the items and the or buttons to adjust the screen as you want.
●
Red, Green, Blue, Cyan, Magenta and Yellow Gain can be adjusted between 0 and 100.
●
Saturation-Red, Green, Blue, Cyan, Magenta and Yellow can be adjusted between 0 and 100.
●
Hue-Red, Green, Blue, Cyan, Magenta and Yellow can be adjusted between -50 and 50.
●
Press the MENU button twice or the EXIT button to exit the menu screen.
Red Gain 50
Red Gain 50
Green Gain 50
Blue Gain 50
Cyan Gain 50
Mgt Gain 50
Yellow Gain 50
Saturation-Red 50
Saturation-Green 50
Saturation-Blue 50
Saturation-Cyan 50
Saturation-Mgt 50
Saturation-Yellow 50
Hue-Red 0
Hue-Green 0
Hue-Blue 0
Hue-Cyan 0
Hue-Mgt 0
Hue-Yellow 0
Reset
Prev. Move Adjust
Exit Move Adjust
MENU Prev. Move OK
Function
23
Special Menu Options
1. Press the MENU button and then use , button to select the menu.
2. Press the
, button to select Language item.
3. Press the
, button to select the language you want to use.
●
On-Screen-Display (OSD) is displayed in the selected language.
●
Press the MENU button twice or the EXIT button to exit the menu screen.
Selecting Language
1. Press the RATIO button.
Each press of the button changes the display as below.
●
You can also use this function by using the MENU button.
Using ARC Function
16:9
4 : 3
4:3
16:9
Overscan Function
1. Press the MENU button and then use , button to select the menu.
2. Press the
, button to select Overscan item.
3. Press the
, buttons.
●
The Overscan function can be adjusted only in RGB, HDMI and Component
modes.
●
The Overscan function can be adjusted between Off and 10%.
●
The Overscan function can not be adjusted if the Zoom -/+ in Digital Zoom is
set to a value other than 100%.
●
Press the MENU button twice or the EXIT button to exit the menu screen.
Language
Aspect Ratio
Overscan
Flip horizontal
Flip vertical
Sleep time
Auto sleep
Set ID
Presentation timer
Digital Zoom
English
4 : 3
1
10%
Off
Off
MENU Prev. Move Select
Language
Aspect Ratio
Overscan
Flip horizontal
Flip vertical
Sleep time
Auto sleep
Set ID
Presentation timer
Digital Zoom
English
4 : 3
1
10%
Off
Off
MENU Prev. Move Select
Function
24
Flip horizontal Function
* This function reverses the projected image horizontally.
Use this function when rear projecting an image.
1. Press the MENU button and then use , button to select the menu.
2. Press the
, button to select Flip horizontal item.
3. Press the OK button to see reversed image.
●
Each time you press the OK button, the image will be reversed.
●
Press the MENU button twice or the EXIT button to exit the menu screen.
Flip vertical Function
* This function reverses the projected image vertically.
* When you hang the projector upside down from the ceiling ,
you will need to reverse the image vertically and horizontally.
1. Press the MENU button and then use
, button to select the menu.
2. Press the
, button to select Flip vertical item.
3. Press the OK button to see reversed image.
●
Each time you press the OK button, the image will be reversed.
●
Press the MENU button twice or the EXIT button to exit the menu screen.
* The sleep timer turns the projector off at the preset time.
1. Press the MENU button and then use , button to select the menu.
2. Press the
, button to select Sleep time item.
3. Press the
, button to select the desired preset time.
●
Press the MENU button twice or the EXIT button to exit the menu screen.
Sleep time Function
Off 10 Min 20 Min 30 Min 60 Min
240 Min
180 Min 120 Min 90 Min
Language
Aspect Ratio
Overscan
Flip horizontal
Flip vertical
Sleep time
Auto sleep
Set ID
Presentation timer
Digital Zoom
English
4 : 3
1
10%
Off
Off
Language
Aspect Ratio
Overscan
Flip horizontal
Flip vertical
Sleep time
Auto sleep
Set ID
Presentation timer
Digital Zoom
English
4 : 3
1
10%
Off
Off
Language
Aspect Ratio
Overscan
Flip horizontal
Flip vertical
Sleep time
Auto sleep
Set ID
Presentation timer
Digital Zoom
English
4 : 3
1
10%
Off
Off
MENU Prev. Move Select
MENU Prev. Move OK
To flip
MENU Prev. Move OK
To flip
Function
25
1. Press the MENU button and then use ,
button to select the menu.
2. Press the , button to select Auto sleep item.
3. Press the
, button to select the desired preset time.
●
Press the MENU button twice or the EXIT button to exit the menu screen.
Auto sleep Function
Presentation timer Function
* This function turns the projector off automatically after the preset time is passed
when there is no signal.
Off 10 Min 20 Min 30 Min 60 Min
240 Min
180 Min 120 Min 90 Min
1. Press the TIMER button of remote control.
2. Press the
, button to select
Time alarm or Time keeper item.
3. Press the
, button to select the desired preset time.
4. The timer starts to operate if you select specific time.
●
Time alarm function : If you select a specific time, it is displayed in minute units. After 1 minute, the remaining
time is displayed at the bottom right of the screen, and then disappears after 5 seconds.
When the remaining time is displayed, other OSD windows are closed. When the set
time is reached, ‘0 minute’ flickers 10 times at 1 second intervals, and then disappears.
●
Time keeper function : If you select a specific time, it continues to be displayed in minute(‘) and second(“)
units. Even though other OSD windows appear, the remaining time is displayed again
after the windows are closed. When the set time is reached. 0’ 00” flickers 10 times at
1 second intervals, and then disappears.
5. If the set time disappears because of the use of other menus, press the TIMER button on a remote
to display the set time again.
●
The Time alarm function and the Time keeper function cannot be used at the same time.
●
The Time alarm function can be set from 5 to 60 minutes at 5 minute intervals (Off, 5, 10, 15, 20, ..............,
55, 60 minutes).
●
The Time keeper function can be set from 1 to 10 minutes at 1 minute intervals, and from 10 to 60 minutes al
5 minute intervals (Off, 1, 2, 3, 4, .............., 8, 9, 10, 15, 20, 25, .............., 55, 60 minutes).
●
You can use this function through the MENU button.
●
Press the EXIT button to exit the menu screen.
Language
Aspect Ratio
Overscan
Flip horizontal
Flip vertical
Sleep time
Auto sleep
Set ID
Presentation timer
Digital Zoom
English
4 : 3
1
10%
Off
Off
MENU Prev. Move Select
Time alarm
Time Keeper
Off
Off
MENU Exit Move Select
Function
26
Using Digital Zoom Function
Adjusting the Zoom
Adjusting the Position
* This function is available only in RGB input mode.The Zoom -/+and Position values return to their defaults when
you change the SOURCE or input signal,or turn the power off.
1. Press the ZOOM button on the remote control.
2. Press the
, button to select Zoom -/+ item.
1. Press the ZOOM button on the remote control.
2. Press the , button to select Position item.
Zoom -/+
Position
Reset
100 %
MENU Prev. Move Select
Zoom -/+
Position
Reset
110 %
MENU Prev. Move OK
Press OK to Start
3. Press the , button to adjust Zoom -/+ to your
choice.
●
You can adjust Zoom -/+ in 5%increments from 100%to
250%.
●
You can also use this function by using the MENU button.
●
Press the EXIT button to exit the menu screen.
3. Press the OK button. When the window below appears
at the bottom right corner of the screen, press the
//
Ë to adjust the position. When the arrow turns black,
maximum adjustment has been reached and no further
adjustment can be made.
●
Position is activated only when Zoom --/+is set to more
than 105%.
●
You can also use this function by using the MENU button.
●
Press the EXIT button to exit the menu screen.
Prev.
Function
27
Digital Zoom Function
1. Press the KEYSTONE button on the remote control.
2. Press the , button to select a item.
Keystone
Top left
H 0
V 0
Bottom
Top
Right
Left
Top left
Top right
Bottom left
Bottom right
3. Press the , button to select the item (H or V)you want,and press the , button to adjust it.
●
You can adjust each item from 0 to 100.
●
The default value may change depending on input mode.
●
You can also use this function by using the MENU button.
●
Press the EXIT button to exit the menu screen.
1. Press the BLANK button.
●
The screen turns off to a background color.
●
You can choose the background color.
(Refer to ‘Selecting blank image color’)
2. Press any button to cancel the blank function.
●
To temporarily turn off the lamp, press BLANK on the remote control. Do not block the projection lens with any
objects when the projector is under operation as this could cause the objects to become heated and deformed
or even cause a fire.
Using Blank Function
* This function may be effective if you need to get the attention of the audience during presentations, meetings or briefings.
Function
28
1. Press the MENU button and then use , button to select the menu.
2. Press the
, button to select Blank image item.
3. Press the
,
button to select the color you want to use.
●
Background image will be altered to the selected Blank image function.
●
You can choose blue, black, green, or captured image for the Blank image.
●
If you have a captured image, you can use it as a blank image instead of logo
image. And you only have one last captured image.
●
When you select the Captured image, displays a logo, if you don’t have a cap-
tured image.
●
Press the MENU button twice or the EXIT button to exit the menu screen.
Selecting Blank image
1. Press the MENU button and then use , button to select the menu.
2. Press the
, button to select Lamp mode item.
3. Press the
, button to select
High Bright or Economic.
●
This menu disappears automatically at specific temperatures(95°F(35°C) or
higher).
●
This changes into Economic mode automatically at specific temperatures
(95°F(35°C) or higher).
●
Press the MENU button twice or the EXIT button to exit the menu screen.
Lamp mode Function
Captured Image Function
1. Press the MENU button and then use
, button to select the menu.
2. Press the
, button to select
Captured Image item.
3. Press the OK button to capture actual screen image.
4. Press the OK button again to save Screen capture image.
●
You can use the captured image as a Blank image.
●
You can not use the remote control when this function is in use.
●
If you want see your captured image, select Captured image in the Blank image
function.
●
Press the MENU button twice or the EXIT button to exit the menu screen.
Keystone
Blank Image
Captured Image
Lamp mode
Monitor Out
Lamp time 11 Hr
Black
High bright
RGB1
To set
MENU Prev. Move OK
Confirm Screen Capture
OK Cancel
Keystone
Blank Image
Captured Image
Lamp mode
Monitor Out
Lamp time 11 Hr
Black
High bright
RGB1
MENU Prev. Move Select
Keystone
Blank Image
Captured Image
Lamp mode
Monitor Out
Lamp time 11 Hr
Black
High bright
RGB1
MENU Prev. Move Select
Function
29
1. Press the MENU button and then use , button to select the menu.
2. The used lamp time is displayed.
●
When projector lamp is reaching the end of its life, the lamp indicator will turn red.
(Refer to the page 10.)
●
The lamp warning LED illuminates red continuously in the case of excessive lamp
time.
●
Press the MENU button twice or the EXIT button to exit the menu screen.
Checking lamp time
1. Press the STILL button of remote control.
* You can freeze the input image.
2. To exit STILL, press any button .
* The STILL function will release automatically after approximately 10 minutes.
Using Still Function
<Moving Image>
<Still Image>
1. Press the MENU button and then use
, button to select the menu.
2. Press the
, button to select
Monitor Out item.
3. Press the
, button to select RGB1 or RGB2.
●
Press the MENU button twice or the EXIT button to exit the menu screen.
Using Monitor out Function
Keystone
Blank Image
Captured Image
Lamp mode
Monitor Out
Lamp time 11 Hr
Black
High bright
RGB1
MENU Prev. Move Select
Keystone
Blank Image
Captured Image
Lamp mode
Monitor Out
Lamp time 11 Hr
Black
High bright
RGB1
* You can select either of the two RGB inputs.
MENU Exit Move OK
Function
30
1. Press the AUTO button of the remote controller.
●
Image positioning and synchronization are automatically adjusted.
2. If any more manual adjustment is needed according to the various PC
mode inputs even after the auto-correction, execute Phase, Clock,
Horizontal
and Vertical function in menu. In certain circumstances,
you can’t get the best picture quality by only using auto-correction.
Auto configure Function
* This function assures you of getting the best video quality by automatically adjusting the horizontal size and synchronization
of the image.
* Auto Tracking function works in RGB PC input only.
Auto Configure
You can also use this function by using the MENU button. (Only in RGB mode)
For best results, perform this function while displaying a still image.
Screen Menu Options
1. Press the MENU button and then use , button to select the
menu.
2. Press the
, button to select
Phase item.
3. Press the
, button to make desired adjustments.
●
Phase adjustment range is 0 ~63.
●
The variable range can be different depends on input resolutions.
●
Press the MENU button twice or the EXIT button to exit the menu screen.
1. Press the MENU button and then use , button to select the
menu.
2. Press the
, button to select Clock item.
3. Press the
, button to make desired adjustments.
●
Clock adjustment range is -20 ~ 20.
●
The variable range can be different depends on input resolutions.
●
Press the MENU button twice or the EXIT button to exit the menu screen.
Using Clock Function
Using Phase Function
Auto Configure
Phase 8
Clock 0
Horizontal 0
Vertical 0
MENU Store Move Adjust
Auto Configure
Phase 8
Clock 0
Horizontal 0
Vertical 0
MENU Store Move Adjust
Function
31
1. Press the MENU button and then use , button to select the
menu.
2. Press the
, button to select Horizontal item.
3. Press the
, button to make desired adjustments.
●
Horizontal adjustment range is -50 ~ 50.
●
The variable range can be different depends on input resolutions.
●
Press the MENU button twice or the EXIT button to exit the menu screen.
1. Press the MENU button and then use , button to select the
menu.
2. Press the
, button to select Vertical item.
3. Press the
, button to make desired adjustments.
●
Vertical adjustment range is -25 ~ 25.
●
The variable range can be different depends on input resolutions.
●
Press the MENU button twice or the EXIT button to exit the menu screen.
Using Vertical Function
Using Horizontal Function
Auto Configure
Phase 8
Clock 0
Horizontal 0
Vertical 0
MENU Store Move Adjust
Auto Configure
Phase 8
Clock 0
Horizontal 0
Vertical 0
MENU Store Move Adjust
RS-232C
32
External Control Device Setup
SET ID
How to connect external control equipment
*
Connect the RS-232C input jack to an external control device (such as a computer) and control the Projector’s functions externally.
1. Press the MENU button and then use , button to select the menu.
2. Press the OK button and then use
, button to select Set ID item.
3. Press the
, button to select your desired number.
Press the OK button to save the selected number.
●
The adjustment range of Set ID is 1~99.
●
Only the projector with the specified ID number will operate from the remote control.
●
Press the MENU button twice or the EXIT button to exit the menu screen.
• Connect the serial port of the PC to the RS-232C jack on the projector back panel.
• RS-232C cable is not supplied with the projector.
2
3
4
5
6
7
8
External
Device
RXD
TXD
DTR
GND
DSR
RTS
CTS
RXD
96
15
TXD
DTR
GND
DSR
RTS
CTS
Projector
* 1, 9 Pin No Connection
<Fig.1, RS-232 Interface Cable>
2
3
4
5
6
7
8
• Use the RS232C cable to control the projector externally (Refer to Fig.1).
Communication Parameter Setup
• Baud Rate : 9600 bps(UART)
• Data Length : 8 bit
• Parity : none
• Stop bit : 1 bit
• Flow Control : none
• Communication code : ASCII code
Language
Aspect Ratio
Overscan
Flip horizontal
Flip vertical
Sleep time
Auto sleep
Set ID
Presentation timer
Digital Zoom
English
4 : 3
1
10%
Off
Off
MENU Prev. Move Select
RS-232C
33
Command Reference List
* Refer to the detailed information for data with [*] mark.
❑ Communication Protocol
Command1 Command2
Data
(Hexadecimal)
01. Power k a 0 ~ 1
02. Aspect Ratio k c 1 ~ 2
03. Screen Mute k d 0 ~ 1
04. Contrast k g 0 ~ 64
05. Brightness k h 0 ~ 64
06. Color k i 0 ~ 64
07. Tint k j 0 ~ 64
08. Sharpness k k 0 ~ 64
09. OSD Select k l 0 ~ 1
10. Remote Control Lock / Key Lock k m 0 ~ 1
11. Color Temperature k u 0 ~ 3
12. Red ADC gain adjustment j w 0 ~ 64
13. Green ADC gain adjustment j y 0 ~ 64
14. Blue ADC gain adjustment j z 0 ~ 64
15. Low Power j q 0 ~ 1
16. Auto configuration j u 1
17. Input Select x b *
18. Key m c Key code
* Real data mapping 1
* Real data mapping 2
RS-232C
34
External control device setup
01. Power (Command:ka)
➜ To control Power On/Off of the Projector.
T
ransmission
Data 0 : Power Off
1 : Power On
[k] [a] [ ] [Set ID] [ ] [Data] [Cr]
[k] [a] [ ] [Set ID] [ ] [FF] [Cr]
[a] [ ] [Set ID] [ ] [OK] [Data] [x]
[a] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
Ack
Data 0 : Power Off
1 : Power On
➜ To show Power On/Off status.
T
ransmission
Data 0 : Power Off
1 : Power On
* In like manner, if other functions transmit ‘0xFF’ data based
on this format, Acknowledgement data feed back presents
status about each function.
02. Aspect Ratio
(Command:kc)
➜ To adjust the screen format.
T
ransmission
Data 1 : 4:3
2 : 16:9
Data 1 : 4:3
2 : 16:9
[k] [c] [ ] [Set ID] [ ] [Data] [Cr]
[c] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
1. Transmission
*
[Command 1] : First command to control the set.(k, j, x, ASCII code, 1 Character)
*
[Command 2] : Second command to control the set..(ASCII code, 1 Character)
*
[Set ID] : You can adjust the set ID to choose desired projector ID number in special menu. See previous page.
Adjustment range is 1 ~ 99. When selecting Set ID ‘0’, every connected projector set is controlled.
Refer to ‘Real data mapping 1’.
*
[DATA] : To transmit command data. Transmit 2 character when organized ASCII code.
* Transmit ‘FF’ data to read status of command.
*
[Cr] : Carriage Return
ASCII code ‘0x0D’
*
[ ] : ASCII code character correspond to “Space Bar” which is in order to classify command, set ID and Data.
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* The Projector transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is
data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.
[Command2] [ ] [Set ID] [ ] [OK] [Data] [x]
[Command2] [ ] [Set ID] [ ] [NG] [Data] [x]
3. Error Acknowledgement
2. OK Acknowledgement
* The Projector transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable
functions or communication errors.
Data : [1] : illegal code(This command is not supported.)
[2] : not support function(This function doesn’t work.)
[3] : wait and retry(Try again a few minute later.)
RS-232C
35
03. Screen Mute
(Command:kd)
➜ To select screen mute on/off.
T
ransmission
Data 0 : Screen Mute Off (Picture On)
1 : Screen Mute On (Picture Off)
Data 0 : Screen Mute Off (Picture On)
1 : Screen Mute On (Picture Off)
[k] [d] [ ] [Set ID] [ ] [Data] [Cr]
[d] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
06. Color (Command:ki)
➜ To adjust the screen color. (Video/S-Video/Component)
T
ransmission
Data Min : 0 ~ Max : 64
*
Refer to ‘Real data mapping 1’.
Data Min : 0 ~ Max : 64
[k] [ i ] [ ] [Set ID] [ ] [Data] [Cr]
[ i ] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
07. Tint (Command:kj)
➜ To adjust the screen tint.(Video/S-Video/Component
60Hz or NTSC signal)
T
ransmission
Data Red : 0 ~ Green : 64
*
Refer to ‘Real data mapping2’.
Data Red : 0 ~ Green : 64
[k] [ j ] [ ] [Set ID] [ ] [Data] [Cr]
[ j ] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
08. Sharpness (Command:kk)
➜ To adjust the screen sharpness.(Video/S-Video/Component)
T
ransmission
Data Min : 0 ~ Max : 64
*
Refer to ‘Real data mapping 1’.
Data Min : 0 ~ Max : 64
[k] [k] [ ] [Set ID] [ ] [Data] [Cr]
[k] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
09. OSD Select
(Command:kl)
➜ To select OSD On/Off.
T
ransmission
Data 0 : OSD Select Mode Off
1 : OSD Select Mode On
Data 0 : OSD Select Mode Off
1 : OSD Select Mode On
[k] [ l ] [ ] [Set ID] [ ] [Data] [Cr]
[ l ] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
10. Remote Control Lock/Key Lock
(Command:km)
➜ To lock the front panel controls on the
projector and remote control.
T
ransmission
Data 0 : Lock Off
1 : Lock On
Data 0 : Lock Off
1 : Lock On
[k] [m] [ ] [Set ID] [ ] [Data] [Cr]
[m] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
* If you're not using the remote control, use this mode.
When main power is On/Off, external control lock is released.
11. Color Temperature (Command:ku)
➜ Adjust the color temperature.
Transmission
Data 0 : Normal 1 : Cool 2:Warm 3 : Natural
Data 0 : Normal 1 : Cool 2:Warm 3 : Natural
[k] [u] [ ] [Set ID] [ ] [Data] [Cr]
[u] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
04. Contrast (Command:kg)
➜ To adjust screen contrast.
Transmission
Data Min : 0 ~ Max : 64
*
Refer to ‘Real data mapping 1’.
Data Min : 0 ~ Max : 64
[k] [g] [ ] [Set ID] [ ] [Data] [Cr]
[g] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
05. Brightness (Command:kh)
➜ To adjust screen brightness.
T
ransmission
Data Min : 0 ~ Max : 64
*
Refer to ‘Real data mapping 1’.
Data Min : 0 ~ Max : 64
[k] [h] [ ] [Set ID] [ ] [Data] [Cr]
[h] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
Button Key code Button Key code
RS-232C
36
14. Blue ADC gain Adjustment (Color B)
(Command:jz)
➜ Adjust the Blue gain of ADC part.(RGB)
T
ransmission
Data Min : 0 ~ Max : 64
*
Refer to ‘Real data mapping 1’.
Data Min : 0 ~ Max : 64
[ j ] [z] [ ] [Set ID] [ ] [Data] [Cr]
[z] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
15. Low Power
(Command:jq)
➜ To reduce the power consumption of the projector.
T
ransmission
Data 0 : Low Power Off
1 : Low Power On
Data 0 : Low Power Off
1 : Low Power On
[ j ] [q] [ ] [Set ID] [ ] [Data] [Cr]
[q] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
16. Auto Configure
(Command:ju)
➜ To adjust picture position and minimize image shaking
automatically. It works only in RGB mode.
T
ransmission
Data 1 : To set
Data 1 : To set
[ j ] [u] [ ] [Set ID] [ ] [Data] [Cr]
[u] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
17. Input Select
(Command:xb)
➜ To select input source for the Set.
T
ransmission
Data 20 : Video 30 : S-Video
60 : RGB1 61: RGB2 80 : HDMI
Data 20 : Video 30 : S-Video
60 : RGB1 61: RGB2 80 : HDMI
[x] [b] [ ] [Set ID] [ ] [Data] [Cr]
[b] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
External control device setup
18. Key
(Command:mc)
➜ To send Key code of IR romote control.
T
ransmission
Data Key code
Key code
[m] [c] [ ] [Set ID] [ ] [Data] [Cr]
[b] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
12. Red ADC gain Adjustment (Color R)
(Command:jw)
➜ Adjust the Red gain of ADC part.(RGB)
T
ransmission
Data Min : 0 ~ Max : 64
*
Refer to ‘Real data mapping 1’.
Data Min : 0 ~ Max : 64
[ j ] [w] [ ] [Set ID] [ ] [Data] [Cr]
[w] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
13. Green ADC gain Adjustment (Color G)
(Command:jy)
➜ Adjust the Green gain of ADC part.(RGB)
T
ransmission
Data Min : 0 ~ Max : 64
*
Refer to ‘Real data mapping 1’.
Data Min : 0 ~ Max : 64
[ j ] [y] [ ] [Set ID] [ ] [Data] [Cr]
[y] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
POWER
SOURCE
MENU
EXIT
OK
STILL
RATIO
BLANK
TIMER
W.PEAK
KEYSTONE
GAMMA
MODE
ZOOM
AUTO
40
41
02
03
AD
EF
43
5B
44
BC
79
84
26
69
A4
6E
4D
4F
4E
5C
92
Information
37
Supported Monitor Display
Component-*1 HDMI(DTV)-*2Signal
<DVD/DTV Input>
* Cable type
1- RCA to D-Sub Adapter
2- HDMI to HDMI Cable
59.94 / 60Hz
480i
480p
720p
1080i
50Hz
576i
576p
720p
1080i
O
O
O
O
O
O
O
O
X
O
O
O
X
O
O
O
* The following table lists the display formats supported by the projector.
* If the projector does not support the input signal, “Out of Range”
message appears on the screen.
* The projector supports DDC1/2B type as Plug & Play function.
(Auto recognition of PC monitor)
* The Synchronization input form for horizontal and vertical frequen-
cies are Separate.
* According to PC, the optimum vertical frequency may not be dis-
played up to the optimum frequency of set in ‘Registration infor-
mation (Display registration information)’. (ex, The optimum verti-
cal frequency may be displayed up to 85Hz or under in the resolu-
tion of 640X480 or 800X600.)
Maintenance
Cleaning the lens
Clean the lens whenever you notice dirt or dust on the surface of it. Wipe the lens surface gently with an air spray or a soft, dry lint-free cloth.
To remove dirt or stains on the lens, moisten a soft cloth with water and a neutral detergent and wipe the lens surface gently.
Cleaning the Projector Case
To clean the projector case, first unplug the power cable. To remove dirt or dust, wipe the casing with a soft, dry, lint-free cloth. To remove stubborn dirt or stains,
moisten a soft cloth with water and a neutral detergent and then wipe the casing.
Do not use alcohol, benzene, thinners or other chemical detergents as these can cause the casing to be warped or discolored.
* The projector needs little maintenance. You should keep the lens clean because any dirt or stains may appear on the screen. If any parts need to be replaced,
contact your dealer. When cleaning any part of the projector, always turn the power off and unplug the projector first.
Sources Format Vertical Freq.(Hz) Horizontal Freq.(kHz)
Information
38
Replacing the Lamp
Lamp Replacement
Be careful when replacing lamp
The change interval of lamp may depend on the use environment of Projector. You can
see the used lamp time in the CHECKING LAMP TIME section of the Menu (page.29).
You must replace the lamp when:
● The projected image gets darker or starts to deteriorate.
● The lamp indicator is red.
● The message “Replace the lamp” appears on the screen when turning the
projector on.
- Press the POWER button on the control panel or remote control to turn off power.
- If the operation indicator LED is orange and blinking, do not disconnect the main supply until the operation indicator LED
is lit up constantly (orange).
- Allow the lamp to cool for 1 hour before replacing it.
- Replace only with the same type lamp from an LG Electronics Service Center. Using another manufacturers lamp may
cause damage to the Projector and lamp.
- Pull out the lamp only when replacing the lamp.
- Keep the lamp unit out of reach of children. Keep the Lamp away from heat sources such as radiators, stoves etc.
- To reduce the risk of fire do not expose the lamp to liquids or foreign materials.
- Do not place the lamp near any heat source.
- Make sure the new lamp is securely tightened with screws. If not, the image may be dark or there could be an increased
risk of fire.
- Never touch the lamp unit glass otherwise image quality may be compromised or lamp life maybe reduced.
To obtain a replacement Lamp unit
Lamp model number is on page 41. Check the lamp model and then purchase it from an LG Electronics Service Center.
Using another manufacturers lamp may cause damage to the projector.
Lamp unit disposal
Dispose of the used lamp by returning it to the LG Electronics Service Center.
<Front panel of the Projector>
Lamp indicators
Information
39
1
Turn off the projector and unplug the power cable.
Carefully place on a cushioned surface.
(Allow the lamp to cool for 1 hour before
removing the used lamp from the projector.)
2
Unscrew the screw from the lamp cover using a
screwdriver.
Lamp case screw
3
After lifting the lamp cover off, remove the two
retaining screws on the lamp case with a screw-
driver.
4
Lift the lamp up from the projector.
5
Pull out the handle slowly and remove the lamp
case.
6
Insert the new lamp gently into the correct position.
Make sure it is inserted correctly.
7
Tighten the screws you removed in step 3.
(Make sure they are fixed firmly.)
8
Close the lamp cover and install the screws from
step 2 to install the cover.
(If the lamp cover is not installed correctly the unit will not
power on.)
Replacing the Lamp
Screws
Using another manufacturers lamp may cause damage to the projector or lamp.
Make sure the lamp cover is securely fastened. If the lamp cover is not installed correctly the unit will not power on.
If this fault persists contact an LG Authorized Service Center.
Knob
Information
40
How to fix the lens cap to the projector
How to fix the lens cap
1
Prepare the lens cap and the strap supplied as
accessories.
2
Insert the non-knot end of the strap into the hole at
the bottom of the lens section of the projector.
3
Fix the strap at the hole of the projector into the
hole of the lens cap, and then pass the lens cap
through the strap lasso.
4
They are completely assembled as shown at
the below figure.
Regarding the projector lamp control
● Don’t turn off the projector at least in 5 minutes after activating it.
- The frequent On/Off changes may cause the lamp function to deteriorate.
● Don’t pull out the power cord while activating the projector and the cooling fan.
- It may cause the lamp life-span to shorten and get damaged.
● The life-span of projector may considerably depend on the use environment and treatment conditions.
● The projector uses the high pressure mercury lamp so that the serious caution is essential. The shock or abuse while using
may cause lamp to blow off with explosion.
● When you continue to use the projector after an interval of lamp replacement, the lamp may be blown off with explosion.
● The following treatment should be done, in case of lamp blow-off.
- Pull off the power cord immediately.
- Let some fresh air in immediately (Ventilation).
- Check the product condition at the nearer service center and replace it with new lamp, if necessary.
- Don’t try to disassemble the product without the authorized technician.
WARNING
Information
41
Specifications
Operating Condition Projector Lamp
MODEL
Resolution
Horizontal / Vertical Ratio
DLP panel size
Screen size
(Projection distance)
Projection off-set ratio
Remote control distance
Zoom ratio
Video compatibility
Power
Height(mm/inches)
Breadth(mm/inches)
Length(mm/inches)
Weight(kg/pound)
1024(Horizontal) x 768(Vertical)pixel
4:3(horizontal:vertical)
BX501B (BX501B-JD)
Temperature
In operation : 32~104°F(0°C~40°C)
In storage and transit : -4~140°F(-20°C~60°C)
Humidity
In operation : 0~ 75% relative humidity by dry hygrometer
Not in operation : 0 ~ 85% relative humidity by dry hygrometer
Lamp model
AJ-LBX50
Lamp power consumption
330W
0.7 inches
Wide : 1.26 ~ 9.63m(40 ~ 300 inches)
Tele : 1.50 ~ 11.47m(40 ~ 300 inches)
100%
12m
1:1.2
NTSC/PAL/SECAM/NTSC4.43/PAL-M/PAL-N
AC 220 - 240V~ 50/60Hz, 2.0A-1.8A
114/4.5
346/13.6
263/10.4
4.8/10.58
BX501B
œ∞Oq «∞Lº∑ªbÂ
LG DLP PROJECTOR
LG DLP PROJECTOR
|d§v Æd«¡… ≥c« «∞b∞Oq °FMU|W Æ∂q ¢AGOq «∞πNU“.
|d§v «ô•∑HUÿ °U∞b∞Oq ∞Kd§uŸ ≈∞Ot ±º∑I∂öÎ.
ßπq ¸Ær «∞Dd«“ Ë«∞dÆr «∞∑ºKºKw ∞KπNU“.
«≤Ed «∞LKBo «∞L∏∂X ´Kv «∞πe¡ «∞ºHKw ∞KπNU“ Ë«≤Iq ≥cÁ
«∞LFKu±U‹ ≈∞v «∞uØOq ´Mb «∞•U§W ≈∞v «∞ªb±W.
¸Ær «∞Dd«“:
«∞dÆr «∞∑ºKºKw:
