Kenmore 3627596092 gas range repair and replacement parts

User Manual - Page 24

For 3627596092.

PDF File Manual, 98 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Operating the Self°Cleaning Oven (cont ooed)
How to Set the Amount of Cleaning Time
Models with press pads:
The clean cycle is normally 3 hours. You can change
the clean time to any time between 2 and 4 hours
depending on the amount of sei{ in your oven,
1. Turn the OVEN SET knob and the OVEN TEMP
knob to CLEAN Slide the latch handle to the right
as far as it will go_
2. Press the UP or DOWN pad to set the desired
cleaning time°
You have one minute to change your clean time after
the cleaning time of 3 hours is displayed,
Models with dials:
Set the automatic oven timers: Make sure the range
clock is set to the correct time of day_ Clear the
DELAY START and STOP TIME dials of any previous
timed cooking or cleaning function by: one at a time,
push the DELAY START and STOP TIME dials in and
turn the dials. Using a light touch, continue turning the
knob until it "pops" out. Both dials should now be in
the out position.
Decide on the cleaning hours necessary, The rec-
ommended cleaning times are: Light to Moderate
Soil--2-3 hours (thin spills and light spatters), Heavy
Soil--4 hours (heavy, greasy spills and spatters)_
Add these hours to the present time of day, then push
in and turn the STOP TIME dial clockwise to this later
stop time.
The oven door gets hot during self-cleaning. DO NOT
TOUCH The CLEANING light will glow, indicating the
controls have been set correctly and the clean cycle
has begun. If a delayed start has been selected, the
CLEANING light will not glow until the start time has
been reached and the clean cycle begins. The door
will lock approximately 20 minutes after the clean
cycle has begun,
To Stop a Clean Cycle
Turn the OVEN TEMP knob to the OFF position_ This
wilt stop the cleaning cycle but you wilt not be able to
open the door until the oven cools below the locking
temperature,,
After a Clean Cycle
After a clean cycle, you may notice some white ash
in the oven, Just wipe it up with a damp cloth.
if white spots remain, remove them with a soap-
filled steel wool pad. Be sure to rinse thoroughly
with a vinegar and water mixture° These deposits
are usually a salt residue that cannot be removed by
the clean cycle.,
If the oven is not clean after one cycle, the cycle
may be repeated°
NOTE:
.While the oven is self-cleaning (on models with
press pads), you can press the CLOCK pad to dis-
play the time of day. To return to the clean count-
down, press the COOK TIME ON/OFF pad.
. You cannot set the oven for cooking until the oven is
cool enough for the door to be unlatched.,
How to Delay Start of Cleaning
Models with press pads:
You wil! have one minute to set a delayed start.
1. Turn the OVEN SET knob and the OVEN TEMP
knob to CLEAN° Slide the latch handle to the right
as far as it will go.
2. If you want to change the normal cleaning time,
press the UP or DOWN pad until the desired
amount of clean time is reache&
3. Press the START TIME ON/OFF pad.
4. Press the UP or DOWN pad to set the time of day
you want cleaning to start,
Models with dials:
If you wish to start and stop cleaning at a later time
than shown on the clock, push in and turn the DELAY
START dial to the time you wish to start. Add the
hours needed for cleaning to this "start" time, then
push in and turn the STOP TIME dial to this later stop
time. The oven will automatically turn on and off at the
set times
24
Loading ...
Loading ...
Loading ...