Loading ...
Loading ...
Loading ...
Odometer
• On (default)
• Off
Gear Display — If Equipped With A Premium Cluster
• Full (default)
• Single
Defaults (defaults: Outside Temp UL, Compass UR, Center
Menu Title)
• Restore
• Cancel
Speed Warning
Push and release the up or down arrow button until the
Speed Warning Menu icon/title is highlighted in the
instrument cluster display. Push and release the OK button
to enter speed warning. Use the up or down arrow button
to select a desired speed, then push and release the OK
button to set the speed. When the set speed is just
exceeded, a single chime will sound along with a pop up
message of speed warning exceeded. When the set speed is
exceeded by 2 mph (3km/h) or more, the indicator will
light up yellow and flash along with a continuous chime (
until the speed is no longer exceeded).
Battery Saver On/Battery Saver Mode Message —
Electrical Load Reduction Actions — If Equipped
This vehicle is equipped with an Intelligent Battery Sensor
(IBS) to perform additional monitoring of the electrical
system and status of the vehicle battery.
In cases when the IBS detects charging system failure, or
the vehicle battery conditions are deteriorating, electrical
load reduction actions will take place to extend the driving
time and distance of the vehicle. This is done by reducing
power to or turning off non-essential electrical loads.
Load reduction is only active when the engine is running.
It will display a message if there is a risk of battery
depletion to the point where the vehicle may stall due to
lack of electrical supply, or will not restart after the current
drive cycle.
4
GETTING TO KNOW YOUR INSTRUMENT PANEL 143
Loading ...
Loading ...
Loading ...