Loading ...
Loading ...
Loading ...
(41,1)
北米Model "A3210BE-C" EDITED: 2019/ 11/ 28
1. Turn the ignition switch to the “ON”
position.
2. While the select lever is in the “P”
position and the parking brake is applied,
press button “1” or “2”.
A chirp sounds and the seat moves to the
registered position.
NOTE
. If a new position is registered for the
same button, the previously registered
seat position is deleted.
. If the vehicle battery is removed, the
registered seat position is not deleted.
. When the button “1” or “2” is
pressed within 45 seconds after the
driver’s door is opened, the registered
seat position can be retrieved even if
the ignition switch is in the “LOCK” or
“OFF” position.
. When “1” or “2” is pressed, a chirp
sounds twice if the seat position is the
same as the registered position.
! Retrieval of the seat position
registered with access key fob
S01AQ060304
1. Hold the registered access key fob.
2. Unlock the driver’s door by pressing
the “
” button or gripping the door handle.
3. Open the driver’s door.
A chirp sounds and the seat moves to the
registered position.
NOTE
. If the registered seat position cannot
be retrieved after performing the pre-
vious procedures, try the following
procedures.
(1) Press the “SET” button on the
driver’s door.
(2) Press the “
” button on the
access key fob or touch the door
lock sensor to lock the doors.
(3) Perform the prior procedures
again.
. If the keyless access function is
disabled, the seat position cannot be
retrieved by gripping the driver’s door
handle. However, the seat position can
still be retrieved by pressing the “
”
button on the access key fob. For
information about how to enable/dis-
able the keyless access function, refer
to “Disabling keyless access function”
FP128.
. If a new position is registered for the
same access key fob, the previously
registered seat position is deleted.
. When the driver’s door is opened, a
chirp sounds twice if the seat position
is the same as the registered position.
! Clearing the registered seat posi-
tions with access key fob
S01AQ060305
1. Close the driver’s door.
2. While holding the access key fob and
pressing the “SET” button, press the “
”
button on the access key fob.
– CONTINUED –
Seats
39
1
Seat, seatbelt and SRS airbags
Loading ...
Loading ...
Loading ...