Loading ...
Loading ...
Loading ...
(354,1)
北米Model "A3210BE-C" EDITED: 2019/ 11/ 28
operation indicator light will turn off and the
electronic parking brake indicator light will
illuminate.
! Tips
S07AP030505
. When the electronic parking brake is
automatically applied with the vehicle kept
held by the Auto Vehicle Hold function,
release the electronic parking brake by
either of the following operations before
starting off. Then make sure that the
electronic parking brake indicator light is
off.
– Depress the accelerator pedal with
the driver’s seatbelt fastened and with
the doors closed.
– Press the electronic parking brake
switch with the brake pedal depressed.
. Under certain conditions, including a
malfunction of the Auto Vehicle Hold, a
warning buzzer will sound and a warning
message will appear on the combination
meter display (color LCD). All warning
messages should be strictly observed.
. On a steep slope, the vehicle cannot be
kept held by the Auto Vehicle Hold func-
tion. In such a case, depress and hold the
brake pedal.
. When holding on a steep slope with the
Auto Vehicle Hold function activated, the
electronic parking brake may automati-
cally applied after stopping, then the
electronic parking brake indicator light
may flash. In such a case, depress and
hold the brake pedal while held. Other-
wise, the vehicle may move. When getting
out of the vehicle, stop the vehicle on a flat
surface, then apply the electronic parking
brake.
. If the Auto Vehicle Hold ON indicator
light does not illuminates even after
pressing the Auto Vehicle Hold switch with
the operating conditions met, the function
may have a malfunction. Contact your
SUBARU dealer for an inspection.
. You may hear a sound while the Auto
Vehicle Hold function is keeping your
vehicle held. This is normal, and does not
represent a malfunction.
. While the vehicle is kept held by the
Auto Vehicle Hold function, the brake
pedal may feel stiff. However, this is not a
malfunction.
. When using the Auto Vehicle Hold
function, depress the brake pedal firmly.
Otherwise, the Auto Vehicle Hold may not
operate.
. When the Auto Vehicle Hold switch is
pressed and held for more than 30
seconds, the Auto Vehicle Hold ON in-
dicator light will turn off and further opera-
tion of the switch will be ignored. To make
the switch usable again, turn the ignition
switch to the “LOCK”/“OFF” position and
then turn it to the “ON” position.
! Emergency brake
S07AP0303
CAUTION
Use the emergency brake only in
case of an emergency. If the emer-
gency brake is excessively used, the
brake parts will wear down faster or
the brake may not work sufficiently
due to brake overheating.
NOTE
While using the emergency brake:
. The electronic parking brake indica-
tor light and the indicator light on the
parking brake switch illuminate and a
chirp sounds.
. A sound may be heard from the
engine compartment. This is the oper-
ating sound of the brake that is acti-
vated by the Vehicle Dynamics Control
system, and does not indicate a mal-
function.
If the foot brake has a malfunction, you can
stop the vehicle by pulling the parking
brake switch continuously.
While applying the emergency brake, the
electronic parking brake indicator light and
the indicator light on the parking brake
switch illuminate and a chirp sounds.
Parking your vehicle
352
Loading ...
Loading ...
Loading ...