Loading ...
Loading ...
Loading ...
(357,1)
北米Model "A3210BE-C" EDITED: 2019/ 11/ 28
ditions.
Braking power is maintained temporarily
(for approximately 2 seconds) by the Hill
start assist system after the brake pedal is
released. The driver is therefore able to
start the vehicle in the same way as on a
level grade, just using the accelerator
pedal.
If the braking power of the Hill start assist
system is insufficient after the brake pedal
is released, apply more braking power by
depressing the brake pedal again.
The Hill start assist system may not
operate on slight grades. Also, the Hill
start assist system does not operate in the
following cases.
. When starting backward facing uphill
. When starting forward facing downhill
. While the parking brake is applied
. While the ignition switch is in the “ACC”
or “LOCK”/“OFF” position
. While the Vehicle Dynamics Control
warning light is illuminated. Refer to
“Vehicle Dynamics Control warning light/
Vehicle Dynamics Control operation indi-
cator light” FP183.
When using the Hill start assist system, a
braking effect may be felt even after the
brake pedal has been released.
CAUTION
The braking power of the Hill start
assist system may not be sufficient
when strong braking power is
needed (e.g., when towing a trailer).
NOTE
A slight jolt may be felt when the
vehicle begins to move forward after
being reversed.
Hill start assist system
355
7
Starting and operating
Loading ...
Loading ...
Loading ...