Loading ...
Loading ...
Loading ...
(226,1)
北米Model "A3210BE-C" EDITED: 2019/ 11/ 28
When exiting:
While the welcome lighting function is
activated, the low beam headlights will
remain illuminated even when either of the
following operation is done.
. The push-button ignition switch is
turned to the “OFF” status (models with
“keyless access with push-button start
system”)
. The key is pulled out from the ignition
switch (models without “keyless access
with push-button start system”)
The low beam headlights will turn off under
any of the following conditions.
. 3 minutes have passed since the low
beam headlights were illuminated by the
welcome lighting function.
. 30 seconds have passed since the door
is opened and closed.
*1
. The light control switch is turned to a
position other than “AUTO”.
. The locking procedure is performed
twice. When performing the unlocking
procedure after performing the locking
procedure, perform the locking procedure
twice again.
*1: The setting for the period of time in which the
low beam headlights remain on by the
welcome lighting function can be changed
by a SUBARU dealer. Contact your
SUBARU dealer for details.
Also, for models with a combination meter
display, the setting can be changed using
the display. For details, refer to “Menu
screens” FP197.
! Sensor for the auto on/off head-
lights
S03AH0101
Models without automatic rain sensing
windshield wipers
Models with automatic rain sensing wind-
shield wipers
1) Rain/light sensor
The sensor is as shown in the illustration.
CAUTION
If any object is placed on or near the
sensor, the sensor may not detect
the level of the ambient light cor-
rectly and the auto on/off headlights
may not operate properly.
Light control switch
224
Loading ...
Loading ...
Loading ...