Loading ...
Loading ...
Loading ...
(351,1)
北米Model "A3210BE-C" EDITED: 2019/ 11/ 28
NOTE
. If you press the parking brake switch
under the following conditions, the
parking brake will not be released.
– The ignition switch is in the
“ACC” or “LOCK”/“OFF” position.
– You are not depressing the brake
pedal.
. The electronic parking brake system
uses motors to apply the parking brake.
Therefore, operating sounds from the
motors will be heard when applying or
releasing the parking brake. Make sure
that the motor sounds are heard when
applying or releasing the parking
brake.
. If you operate the parking brake
switch under the following conditions,
a chirp will sound and the electronic
parking brake indicator light will flash.
– When the electronic parking
brake system has a malfunction.
– When the electronic parking
brake operation is prohibited tem-
porarily.
. When you cannot release the park-
ing brake due to, for example, a system
malfunction, contact your SUBARU
dealer and have your SUBARU dealer
release the parking brake.
. If you stop operating the electronic
parking brake switch midway or oper-
ate extremely slowly, the system may
detect an error and turn on the brake
system warning light. However, this
does not indicate a malfunction if the
brake system warning light turns off
after operating the switch.
. When the electronic parking brake
has not been used for a long period of
time, the electronic parking brake may
operate automatically after the ignition
switch is turned to the “LOCK”/“OFF”
position. This occurs due to checking
the proper operation of the electronic
parking brake and does not indicate a
malfunction.
. If you cannot release the electronic
parking brake due to the switch mal-
function, refer to the instructions de-
scribed in “Automatic release function
by accelerator pedal” FP349.
After activating the electronic parking
brake, you may hear a short sound
several minutes after the electronic
parking brake indicator light illumi-
nates as the system confirms proper
engagement. This sound is different
from the apply and release sound.
This can occur:
– If the brakes are extremely hot.
– If the car is parked on a steep
incline.
– If the electronic parking brake is
applied after the ignition switch is
turned OFF.
This is a normal operating sound under
any of these conditions.
! Automatic release function by ac-
celerator pedal
S07AP0301
The parking brake will be automatically
released by depressing the accelerator
pedal. However, the automatic release
function does not operate under the
following conditions.
. Any door is open.
. The driver’s seatbelt is not fastened.
. The select lever is in the “P” or “N”
position.
If the parking brake is automatically
released, the electronic parking brake
indicator light and the indicator light on
the parking brake switch turn off.
! Auto Vehicle Hold function
S07AP0305
The Auto Vehicle Hold function will auto-
matically keep the vehicle held even after
releasing the brake pedal when the vehicle
is at a complete stop, such as at traffic
signals. The function will be canceled by
either of the following operations.
. Depressing the accelerator pedal
. Depressing the brake pedal again
– CONTINUED –
Parking your vehicle
349
7
Starting and operating
Loading ...
Loading ...
Loading ...