Loading ...
Loading ...
Loading ...
∙ If the liftgate opener switch
䊊
A
is acti-
vated while the cinching motor is en-
gaged, the cinching motor will disen-
gage, and the liftgate will enter the
power open function initiated by the lift-
gate opener switch.
∙ The key fob button must be held for
1 second before the liftgate closes.
Stop - Reverse:
During an open/close movement, the lift-
gate can be stopped, if the Intelligent Key,
instrument panel or liftgate switch (
䊊
A
or
䊊
B
) is pressed. The liftgate can be reversed
if the Intelligent Key, instrument panel or
liftgate switch (
䊊
A
or
䊊
B
) is pressed again.
Auto Reverse:
If an obstacle is detected during power
open or power close, a warning chime will
sound and the liftgate will reverse direction
and return to the full open or full close po-
sition. If a second obstacle is detected, the
liftgate motion will stop and the liftgate will
enter manual mode.
A pinch strip is mounted on each side of
the liftgate. If an obstacle is detected by a
pinch strip during power close, the liftgate
will reverse direction and return to the full
open position.
NOTE:
If the pinch strip is damaged or removed,
the power close function will not oper-
ate.
WARNING
There are some small distances imme-
diately before the closed position which
cannot be detected. Make sure that all
passengers have their hands, etc., in-
side the vehicle before closing the
liftgate.
Manual Mode:
If power operation is not available, the lift-
gate may be operated manually. Power op-
eration may not be available if multiple ob-
stacles have been detected in a single
power cycle, or if battery voltage is low.
If the power liftgate opener switch
䊊
A
is
pushed during power open or close, the
power operation will be canceled and the
liftgate can be operated manually.
To open the liftgate manually, push the lift-
gate opener switch
䊊
A
and lift the liftgate.
To close, lower and push the liftgate down
securely.
LPD2274
3-26 Pre-driving checks and adjustments
Loading ...
Loading ...
Loading ...