Loading ...
Loading ...
Loading ...
1. Pull the hood lock release handle
䊊
1
located below the driver side instru-
ment panel. The hood will spring up
slightly.
2. Push the lever
䊊
2
at the front of the
hood to the side as illustrated with your
fingertips
3. Raise the hood
䊊
3
.
4. Remove the support rod and insert
into the slot
䊊
4
.
When closing the hood, lower it slowly and
make sure it locks into place.
WARNING
∙ Make sure the hood is completely
closed and latched before driving.
Failure to do so could cause the hood
to fly open and result in an accident.
∙ If you see steam or smoke coming
from the engine compartment, to
avoid injury do not open the hood.
WARNING
∙ Always be sure the liftgate has been
closed securely to prevent it from
opening while driving.
∙ Do not drive with the liftgate open.
This could allow dangerous exhaust
gases to be drawn into the vehicle. For
additional information, refer to “Ex-
haust gas (carbon monoxide)” in the
“Starting and driving” section of this
manual.
∙ To help avoid risk of injury or death
through unintended operation of the
vehicle and/or its systems, including
entrapment in windows or inadver-
tent door lock activation, do not leave
children, people who require the as-
sistance of others or pets unattended
in your vehicle. Additionally, the tem-
perature inside a closed vehicle on a
warm day can quickly become high
enough to cause a significant risk of
injury or death to people and pets.
∙ Always be sure that hands and feet
are clear of the door frame to avoid
injury while closing the liftgate.
LPD3064
HOOD LIFTGATE
Pre-driving checks and adjustments 3-23
Loading ...
Loading ...
Loading ...