User Manual - Page 144

For 2020 NISSAN PATHFINDER.

Loading ...
Loading ...
Loading ...
The climate controlled seat can be oper-
ated as follows:
1. Start the engine.
2. Turn the control knob
A
to the heat
side
1
or the cool side
2
. The indica-
tor light
B
on the control knob will illu-
minate.
3. Adjust the desired intensity using the
control knob.
4. When the vehicle’s interior is warmed
or cooled, or before you leave the ve-
hicle, be sure to turn the control knob
to the OFF (center) position. The indica-
tor light
B
on the control knob goes off
with the switch in the OFF (center) po-
sition.
WARNING
Do not use or allow occupants to use
the seat heater if you or the occupants
cannot monitor elevated seat tempera-
tures or have an inability to feel pain in
body parts that contact the seat. Use of
the seat heater by such people could
result in serious injury.
CAUTION
The battery could run down if the seat
heater is operated while the engine is
not running.
Do not use the seat heater for ex-
tended periods or when no one is us-
ing the seat.
Do not put anything on the seat which
insulates heat, such as a blanket,
cushion, seat cover, etc. Otherwise,
the seat may become overheated.
Do not place anything hard or heavy
on the seat or pierce it with a pin or
similar object. This may result in dam-
age to the heater.
Any liquid spilled on the heated seat
should be removed immediately with
a dry cloth.
When cleaning the seat, never use
gasoline, benzine, thinner, or any
similar materials.
If any malfunctions are found or the
heated seat does not operate, turn
the switch off and have the system
checked. It is recommended that you
visit a NISSAN dealer for this service.
LIC3037
HEATED SEAT SWITCHES (if so
equipped)
2-46 Instruments and controls
Loading ...
Loading ...
Loading ...