Loading ...
Loading ...
Loading ...
This unit measures terrestrial magnetism
and indicates the heading direction of the
vehicle.
With the ignition placed in the ON position,
press the
button as described in the
charts below to activate various features of
the automatic anti-glare rearview mirror.
Press and hold
the
button for
about:
Feature:
(Push button again for about
1 second to change settings)
1 second Compass display toggles on/off
8 seconds
Compass zone can be changed
to correct false compass read-
ings
10 seconds
Compass enters calibration
mode
For additional information, refer to “Auto-
matic anti-glare rearview mirror” in the
“Pre-driving checks and adjustments” sec-
tion of this manual.
COMPASS DISPLAY
Press the button for about one sec-
ond when the ignition switch is placed in
the ON position to toggle the compass di-
rection display
䊊
1
on or off. The display will
indicate the direction that the vehicle is
heading.
N: North
E: East
S: South
W: West
If the display reads “C”, calibrate the com-
pass by driving the vehicle in three com-
plete circles at less than 5 mph (8 km/h).
You can also calibrate the compass by driv-
ing your vehicle on your everyday route.
The compass will be calibrated once it has
tracked three complete circles.
LIC1487
COMPASS (if so equipped)
2-8 Instruments and controls
Loading ...
Loading ...
Loading ...