Loading ...
Loading ...
Loading ...
Locking the doors
Press LOCK (Type A) or
(Type B) once to lock both doors. Pressing
LOCK (Type A) or
(Type B) a second time will sound the horn to
confirm the doors are locked.
Sounding a panic alarm
Press
(Type A) or (Type B) to activate the alarm. Press (Type
A) or
(Type B) again, or turn the ignition to the 3 (ON) position to
deactivate.
Note: The panic alarm will only operate when the ignition is in the 1
(LOCK) position.
Replacing the battery
The remote entry transmitter uses one button type three-volt lithium
battery CR2025 or equivalent.
To replace the battery:
1. Twist a thin coin between the two halves of the remote entry
transmitter near the key ring. DO NOT TAKE THE RUBBER COVER
AND CIRCUIT BOARD OFF THE FRONT HOUSING OF THE REMOTE
ENTRY TRANSMITTER.
2. Do not wipe off any grease on the battery terminals on the back
surface of the circuit board.
3. Remove the old battery. Note: Please refer to local regulations when
disposing of transmitter batteries.
• Type A
2007 Low Cab Forward Truck (lcf)
Supplement
USA (fus)
Locks and Security
59
Loading ...
Loading ...
Loading ...