Loading ...
Loading ...
Loading ...
Check every oil change (7,500 miles [12,000 km])
Driveline and rear axle Lubricate the U-joints and the slip
yoke
Brake system Inspect the disc brake pads and the
piston boots.
Inspect the parking brake system;
adjust if necessary.
Fuel system Drain the accumulated water or
sediment from the fuel tank(s)
Steering system Lubricate the steering shaft(s),
U-joints and splines when equipped
with grease fittings
Grease the power steering gear output
shaft
* Coolant protection checks should be made just prior to the onset of
freezing weather, where applicable. If coolant is dirty or rusty in
appearance, the system should be drained, flushed and refilled with the
prescribed solution of engine coolant and water. Use only permanent
type coolant that meets Ford specifications WSS-M97B51-A1 or add
the coolant type originally equipped in your vehicle. See the engine
manufacturer’s operating guide for supplemental corrosion inhibitor
specifications.
In addition to the items to be performed daily or at each oil change, the
services listed in General Maintenance Services need to be completed
as specified.
GENERAL MAINTENANCE SERVICES
The following are vehicle checks that should be made periodically either
by the owner or a qualified technician. It is recommended that
deficiencies be brought to the attention of your dealer or another
qualified service outlet as soon as possible in order that advice regarding
the need for service or replacement can be obtained.
2007 Low Cab Forward Truck (lcf)
Supplement
USA (fus)
Scheduled Maintenance Guide
181
Loading ...
Loading ...
Loading ...