Loading ...
Loading ...
Loading ...
To set a higher set speed
Press and hold RESUME +. If the
vehicle is moving, this will increase
vehicle speed; if the vehicle is
stationary, this will increase engine
RPM. Release the control when the
desired vehicle speed/engine RPM is
reached.
Press and release RESUME + to
operate the tap-up function. Each
press will increase the set speed by 1 mph (1.6 km/h) or engine RPM in
idle mode.
To set a lower set speed
Press and hold SET -. If the vehicle
is moving, this will decrease vehicle
speed; if the vehicle is stationary,
this will decrease engine RPM.
Release the control when the
desired vehicle speed/engine RPM is
reached.
Press and release SET - to operate
the tap-down function. Each press
will decrease the set speed in increments of 1 mph (1.6 km/h) or engine
RPM in idle mode.
To disengage speed control
Depress the brake pedal or press
CRUISE RPM. Disengaging the
speed control will not erase the
previously programmed set speed or
engine RPM.
Turning off the ignition will erase the previously programmed set speed
or engine RPM.
2007 Low Cab Forward Truck (lcf)
Supplement
USA (fus)
Driver Controls
55
Loading ...
Loading ...
Loading ...