Loading ...
Loading ...
Loading ...
R W
hen pressing M
N,
make sure to not
cover the microphone (page 10) with your
fingers.
Adjusting the speaker
v
olume
Monitor unit
1 W
hile viewing images from the camera
unit, press M
N.
2 MbN:
Select the desired setting. a MOKN
Camera unit
1 MM
ENUN
2 MbN: “Camera Speaker Vol.” a MOKN
3 M
b
N:
Select the desired setting. a MOKN
a MMENUN repeatedly to exit.
Adjusting the chime/beep
v
olume
The monitor unit plays chimes and beeps to
indicate the status of the monitor unit and
camera unit sensors. You can adjust the
volume of chimes/beeps, or turn them off.
1 MMENUN
2 MbN: “Monitor Settings” a MOKN
3 MbN: “Beep Volume” a MOKN
4 MbN: Select the desired setting.
R To turn off chimes/beeps:
MbN: “OFF”
5 MOKN a MMENUN repeatedly to exit.
Adjusting the brightness of
c
amera images
1 While viewing images from the camera
unit, press M
N.
2 M
b
N:
Select the desired setting. a MOKN
Adjusting the sleep mode
S
leep mode is used to automatically turn off
the display of the monitor unit when the
monitor unit has been inactive for a specified
period of time. You can select how long the
monitor unit is inactive for before it enters
sleep mode, or turn off sleep mode.
1 MMENUN
2 MbN: “Monitor Settings” a MOKN
3 MbN: “Sleep Mode” a MOKN
4 MbN: Select the desired setting.
R To turn off sleep mode:
MbN: “OFF”
5 MOKN a MMENUN repeatedly to exit.
Configuring the
t
emperature sensor
You can specify how the temperature units
(Celsius or Fahrenheit) are displayed on the
monitor unit and the alert range.
For the alert range, specify an upper and
lower limit. If the temperature of the room
where the camera unit is installed goes
outside of these limits, the monitor unit will
notify you by lighting the smart LED indicator,
playing a chime, etc.
Configuring the temperature units
1 MM
ENUN
2 MbN: “Sensor Settings” a MOKN
3 MbN: “Temperature Sensor” a MOKN
4 MbN: “Units” a MOKN
5 MbN: Select the desired setting. a MOKN
a MMENUN repeatedly to exit.
Configuring the alert range
1 MM
ENUN
20
For assistance, please visit http://shop.panasonic.com/support
Using the Baby Monitor
HN4001_(en_en)_0508_ver.010.pdf 20 2019/05/08 16:24:09
Loading ...
Loading ...
Loading ...