Loading ...
Loading ...
Loading ...
Item Meaning
Timer is set to “O
nce”.
(page 27)
Timer is set to “Repeat”.
(page 27)
Lullaby is set. (page 21)
Displays the temperature
d
etected by the temperature
sensor. (page 20)
Auto scan (page 21)
The monitor unit is talking to
t
he camera unit. (page 19)
Camera zoom is on.
(
page 19)
Displayed when motion is
d
etected. (page 26)
Displayed when sound is
detected. (page 27)
*1 The number displayed in the icon
c
hanges depending on the number of the
connected camera unit.
Confirming the usage area
Wireless communication range
T
he wireless communication range of the
monitor unit from the camera unit is
approximately 457.5 m (1,500 feet). Wireless
communication may be unreliable when the
following obstacles are located between the
monitor unit and camera unit.
R Metal doors or screens
R Walls containing aluminum-sheet insulation
R Walls made of concrete or corrugated iron
R Double-pane glass windows
R Multiple walls
R When using the monitor unit and camera
unit on separate floors or in different
buildings
Note:
R
is displayed on the monitor unit when
t
he camera unit is out of range.
Usage area cautions
U
sing the monitor unit in the following areas
may cause deformation, malfunction, or
operational failure.
R In direct sunlight
R Areas exposed to grease or steam, such as
kitchens
R Near fire or heating devices
R Near magnetic fields (such as near
microwaves and magnets)
R Areas subject to extreme temperature
changes, such as next to air conditioners
R Areas with reflective objects, such as glass,
that can interfere with detection of
temperature variation
R Areas where the temperature is affected by
strong illuminating objects (such as
fluorescent lights)
R Near devices that emit strong radio waves,
such as mobile phones
Testing the baby monitor
s
ystem
Before using your baby monitor system, you
should perform a test run to ensure that the
system is configured correctly. For example,
test the motion sensor, microphone, and
speaker.
Testing the motion detection
r
ange
After setting up the camera unit and monitor
unit, you can use your monitor unit to test the
performance of the camera unit’s motion
detection feature.
1 Move to an area within the camera unit’s
viewable area.
2 While moving near the camera unit, use
your monitor unit to observe where you
are in the viewable area when the camera
unit’s motion detection feature is triggered.
R When the motion detection feature is
triggered,
is displayed on the
monitor unit screen in green or amber
For assistance, please visit http://shop.panasonic.com/support
17
Getting Started
HN4001_(en_en)_0508_ver.010.pdf 17 2019/05/08 16:24:08
Loading ...
Loading ...
Loading ...