Loading ...
Loading ...
Loading ...
Baby monitor
T
he baby monitor system allows you to listen
and view images on a monitor unit from a
room where the camera unit is located. With
the use of smart features (page 25), the
monitor unit notifies you when the camera
unit’s sensors are triggered, and you can also
play lullabies from the camera unit.
Important:
R You should perform a test run of the baby
monitor system before using it (page 17).
R The baby monitor system should not be
used as a substitute for a medical or
caregiver’s supervision. It is the caregiver’s
responsibility to stay close enough to
handle any eventuality.
Viewing l
ive camera images
Images from the camera unit are automatically
displayed on the monitor unit when the
monitor unit is turned on.
If 2 or more camera units have been
registered to your monitor unit, you can switch
the camera image by selecting the desired
camera unit or using auto scan (page 21).
Night vision mode
The infrared LEDs of the camera unit make it
possible to view camera images even when
the area surrounding the camera unit is dark.
Note:
R When night vision mode is active, camera
images are displayed in black and white.
Adjusting camera images from
t
he monitor unit
From the monitor unit, you can adjust the area
viewed by the camera unit by using the pan/tilt.
While viewing images from the camera unit,
press MFN or MEN to adjust the pan range and
MCN or MDN to adjust the tilt range.
Note:
R T
he sound sensor and motion sensor do
not function during and for 5 seconds after
pan/tilt operations.
R Only adjust the pan/tilt with operations from
the monitor unit. Do not adjust the pan/tilt of
the camera unit by hand.
Camera zoom
T
he camera zoom can be used to zoom in on
images displayed on the monitor unit.
1 MSMARTN
2 MCN: Select the desired setting. a
MMENUN
R The setting is saved and the screen is
switched to the selected setting.
Listening/talking to the
c
amera unit
Listening to the camera unit
S
ound from the camera unit is heard on the
monitor unit while the monitor unit is turned
on, and even when it is in sleep mode and
images are not displayed.
Note:
R Sound is not heard on the monitor unit
when it is turned off or when it is out of
range of the camera unit.
R You can adjust the speaker volume of the
monitor unit (page 20).
Talking to the camera unit
W
hile viewing images from the camera unit,
press and hold M
N on the monitor unit to talk.
Release M N to finish talking.
Note:
R You can adjust the speaker volume of the
camera unit (page 20).
R Sound from the camera unit will not be
heard on the monitor unit while talking.
For assistance, please visit http://shop.panasonic.com/support
19
Using the Baby Monitor
HN4001_(en_en)_0508_ver.010.pdf 19 2019/05/08 16:24:09
Loading ...
Loading ...
Loading ...