Loading ...
Loading ...
Loading ...
6 Appendix
Appendix46
Appendix
6
Network Software
Update
Network update notification
From time to time, performance improvements
and/or additional features or services may be
made available to units that are connected to a
broadband home network. If there is new software
available and the unit is connected to a broadband
home network, the unit will inform you about the
update as follows.
Option 1:
1. The update menu will appear on the screen
when you turn on the unit.
2. Use
A/D
to select a desired option and then
press Center button.
[OK] Starts the software update.
[Cancel] Exits the update menu and
displays it next booting.
[Hide] Exits the update menu and
it does not appear until next
software is uploaded in the
update server.
Option 2:
If the software update is available from the update
server, the “Update” icon appears in the Home
menu. Press blue (B) colored button to start the
update procedure.
Software Update
You can update the unit using the latest software
to enhance the products operation and/or add
new features. You can update the software by
connecting the unit directly to the software update
server.
y
Before updating the software in your unit,
remove USB Device from the unit.
y
Before updating the software in your unit,
turn the unit o and then turn it back on.
y
During the software update procedure,
do not turn o the unit or disconnect AC
power, or do not press any button.
y
If you cancel the update, turn o the power
and turn it on for stable performance.
y
This unit cannot be updated to previous
software version.
,
Note
1. Check the network connection and settings
(page 16).
2. Select [Software] option in the [Setup] menu
then press Center button.
3. Select [Update] option, and press Center
button.
The unit will check for the newest update.
y
Pressing Center button while checking for
the update will end the process.
y
If there is no update available, the Message,
“No update is found.” appears. Press Center
button to return to the [Home Menu].
,
Note
4. If a newer version exists, the message “Do you
want to update?” appears.
5. Select [OK] to start update. (Selecting [Cancel]
will end the update.)
Do not turn o the power during the software
update.
>
Caution
Loading ...
Loading ...
Loading ...