Loading ...
Loading ...
Loading ...
||
DRIVER SUPPORT
264
NOTE
The PAP function measures the space and
steers the car - the driver's task is to:
•
keep a close watch around the car
•
follow the instructions in the combined
instrument panel
•
change gear (reverse/forward)
•
control and maintain a safe speed
•
brake and stop.
NOTE
The distance between the car and parking
spaces should be 0.5-1.5 metres (1.6-5.0 ft)
while PAP is searching for a parking space.
The PAP function searches for a parking space
and checks whether it is big enough. Proceed as
follows:
1. Activate PAP by pressing
this button and do not drive
faster than 30 km/h (20 mph).
2. Keep an eye on the combined instrument
panel and be prepared to stop the car when
the graphics and text so request.
3. Stop the car when the graphics and text so
request.
NOTE
PAP searches the area for parking, displays
instructions and guides the car in on its pas-
senger side. But if required the car can also
be parked on the driver's side of the street:
•
Activate the direction indicator to the
driver's side - then the system searches
for a parking space on that side of the
car instead.
2 - Reversing in
During the Reversing step, PAP will steer the car
into the parking space. Proceed as follows:
1. Check that the area behind the car is clear,
then engage reverse gear.
2. Reverse slowly and carefully without touching
the steering wheel - and no faster than
7 km/h (4 mph).
3. Keep an eye on the combined instrument
panel and be prepared to stop the car when
the graphics and text so request.
NOTE
•
Keep your hands away from the steering
wheel when the PAP function is acti-
vated.
•
Make sure that the steering wheel is not
hindered in any way and can rotate freely.
•
To achieve optimum results - wait until
the steering wheel is fully turned before
starting to drive backward/forward.
Loading ...
Loading ...
Loading ...