Loading ...
Loading ...
Loading ...
DRIVER SUPPORT
* Option/accessory.
200
Adaptive cruise control* - managing
speed
Adaptive cruise control with Speed limiter
9
.
Adaptive cruise control without Speed limiter
9
.
To start the ACC:
•
Press the steering wheel button
- a simi-
lar WHITE symbol illuminates in the com-
bined instrument panel (8) which shows that
the adaptive cruise control is in standby
mode (p. 202).
To activate ACC:
•
At the required speed - press the steering
wheel button
or .
> The current speed is stored in the memory,
the combined instrument panel shows a
"magnifying glass" (6) around the stored
speed for a second or so and its marking
changes from WHITE to GREEN.
When this symbol changes colour from
WHITE to GREEN, the ACC is active
and the car maintains the stored
speed.
Only when the symbol shows
an image of another vehicle is
the distance to the vehicle in
front controlled by the ACC.
At the same time a speed
range is marked:
•
the higher speed with GREEN marking is the
pre-programmed speed
•
the lower speed is the speed of the vehicle
in front.
Changing the stored speed
Stored speed is changed with short or long
presses on the
or steering wheel button.
To adjust +/- 5 km/h (+/- 5 mph):
•
Use short presses - each press gives
+/- 5 km/h (+/- 5 mph).
To adjust +/- 1 km/h (+/- 1 mph):
•
Hold down the button and release it at the
required speed.
Last press made is stored in the memory.
If speed is increased using the accelerator pedal
prior to pressing the
/ button, then it is the
car's current speed when the button is pressed
that is stored.
A temporary increase in speed with the accelera-
tor pedal, e.g. during overtaking, does not affect
9
An explanation of the illustration's figures is given in the section "Adaptive cruise control - overview" (p. 198).
Loading ...
Loading ...
Loading ...