1. Home
  2. Vizio
  3. Vizio E321MV User Manual
  4. Page 33

User Manual - Page 33

For E321MV.

Loading ...
Loading ...
Loading ...
6
25
E321MV
Adjusting Bass and Treble Levels
The bass and treble levels for your TV’s built-in speakers can be adjusted to your
liking.
To adjust the bass and treble levels, SRS TruSurround HD must be
set to Off.
To adjust the bass and treble levels:
1. Press the OK button on the remote.
The on-screen menu is displayed.
2. Use the Arrow buttons to highlight
Audio and press OK.
3. Use the Arrow buttons to highlight
Bass & Treble and press OK.
4. Use the Arrow buttons to highlight
Bass or Treble and press OK.
5. Use the Left/Right Arrow buttons to
increase or decrease the level.
6. When you are finished, press EXIT.
Resetting the Audio Settngs
To reset the audio settings to the factory default settings:
1. Press the OK button on the remote. The on-screen menu is displayed.
2. Use the Arrow buttons to highlight Audio and press OK.
3. Use the Arrow buttons to highlight Reset Audio Mode and press
OK.
4. The TV displays “Are you sure you want to RESET Audio Settings to the
factory defaults?”
Use the Arrow buttons to highlight Yes and press OK.
5. Press EXIT.
Adjusting the Picture Settings
Using the Picture menu, you can adjust the
following settings:
• Enableordisabletheambientlight
sensor
• Changethepicturemode
• Adjustnoisereduction
• Adjustcolortemperature
• Enableordisablecolorenhancement
• Enableordisableadaptiveluma
• EnableordisableDCR
(DynamicContrastRatio)
• Resetthepicturemodesettings
Enabling or Disabling the Ambient Light Sensor
When enabled, the ambient light sensor detects the light levels in the room to
optimize the brightness of the TV’s backlight.
When the ambient light sensor is enabled, you will be unable to
manually change the TV’s backlight settings.
To enable or disable the ambient light sensor:
1. Press the OK button on the remote. The on-screen menu is displayed.
2. Use the Arrow buttons to highlight Picture and press OK.
3. Use the Arrow buttons to highlight Ambient Light Sensor.
4. Use the Left/Right Arrow buttons to change the setting to Off or On.
5. Press EXIT.
Loading ...
Loading ...
Loading ...