Loading ...
Loading ...
Loading ...
28
Turning On the Projector
Connect the projector’s AC power cord into an AC
outlet. The LAMP/SHUTTER indicator lights red and the
POWER indicator lights green.
Press the POWER button on the side control or the ON
button on the remote control unit. The LAMP/SHUTTER
indicator dims and the cooling fans start to operate.
The preparation display appears on the screen and the
countdown starts.
2
3
1
16
The preparation display will disappear after 30
seconds.
4
After the countdown, the input source that was
selected the last time and the Lamp mode status icon
(see page 57) appear on the screen.
If the projector is locked with a PIN code, PIN code
Input Dialog Box will appear. Enter the PIN code as
instructed below.
Selected Input Source and Lamp mode
Complete peripheral connections (with a computer,
VCR, etc.) before turning on the projector.
What is PIN code?
PIN (Personal Identification Number) code is a security
code that allows the person who knows it to operate the
projector. Setting a PIN code prevents unauthorized use of
the projector.
A PIN code consists of a four-digit number. Refer to the PIN
code lock function in the Setting Menu on page 59-60 for
locking operation of the projector with your PIN code.
PIN code Input Dialog Box
Enter a PIN code
After the OK icon
disappears, you can
operate the projector.
Lamp mode status
See page 57 for the Lamp mode status
✔Note:
•TheLampreplacementiconandtheFilter
replacementortheFiltercartridgereplacement
iconmayappearonthescreendependingonthe
usagestateoftheprojector.
•Whenthefiltercartridgereplacementicon
keepsappearingonthescreenatturningonthe
projectorforsometimeandnoactionistakento
replacethefiltercartridge,theprojectorwillbe
automaticallyshutdownin3minutesafterturning
ontoprotecttheprojector.(pp.63-65,79)
Use the Point ed buttons on the side control or Number
buttons on the remote control unit to enter a number.
When using side control
Use the Point ed buttons on the side control to select a
number. Press the Point 8 button to fix the number and
move the red frame pointer to the next box. The number
changes to “✳.” Repeat this step to complete entering a
four-digit number. After entering the four-digit number, move
the pointer to “Set.” Press the OK button so that you can
start to operate the projector.
When using remote control unit
Press the Number buttons on the remote control unit to
enter a number (p.17). When you complete entering a four-
digit number, the pointer moves to “Set.” Press the OK
button so that you can start to operate the projector.
If you fixed an incorrect number, use the Point 7 button to
move the pointer to the number you want to correct, and
then enter the correct number.
If you entered an incorrect PIN code, “PIN code” and the
number (✳✳✳✳) will turn red for a moment. Enter the
correct PIN code all over again.
✔Note:
•WhentheLogoselectfunctionissetto“Off,”the
logowillnotbeshownonthescreen(p.55).
•Whenthe“Countdownoff”or“Off”isselectedin
theDisplayfunction,thecountdownwillnotbe
shownonthescreen(p.54).
•Duringthecountdownperiod,alloperationsare
invalid.
•IfthePINcodenumberisnotenteredwithin3
minutesafterthePINcodedialogboxappeared,
theprojectorwillbeturnedoffautomatically.
•The“1234”issetastheinitialPINcodeatthe
factory.
Basic Operation
CAUTION ON HANDLING PIN CODE
If you forget your PIN code, the projector
can no longer be started. Take special care
in setting a new PIN code. Write down the
number as a reminder. Should the PIN code
be missing or forgotten, consult your dealer
or service center.
Loading ...
Loading ...
Loading ...