Loading ...
Loading ...
Loading ...
19
The eight different remote control unit codes (Code 1–Code 8) are assigned to this projector. Switching the
remote control unit codes prevents interference from other remote control units when several projectors or
video equipment next to each other are operated at the same time. Change the remote control unit code for the
projector first before changing that for the remote control unit. See “Remote control” in the Setting Menu on
page 57.
Press and hold the MENU and a number button (1–8)
for more than 5 seconds to switch between the codes.
1
To initialize the remote control code, slide the RESET/
ON/ALL OFF switch to “RESET,” and then to “ON.” The
initial code is set to Code 1.
2
MENU button
Remote Control Unit Code
Number buttons
RESET/ON/ALL
OFF Switch
Press and hold the MENU and a number button
(1–8) that corresponds to the remote control unit
code for more than 5 seconds to switch between
the codes.
Part Names and Functions
Loading ...
Loading ...
Loading ...