Loading ...
Loading ...
Loading ...
Frequently asked questions
134
Problem Possible cause and solution
There is soiling in the
over after the Self Clean
program.
The Self Clean program burns off soiling in the oven
and leaves it as ash.
Using a soft sponge, warm water and liquid dish
soap remove the ashes.
If coarse soiling remains, start the Self Clean
program again with a longer duration.
Grill and griddle are
turned off/cannot be
turned on
Once you start the self cleaning program, grill and
griddle will be turned off.
This is not an error. The Safety cut-out feature has
been activated.
At 1-minute intervals, a maximum of 5ignition tests
will be performed.
Turn the grill and griddle control knob to the right
until it reaches the "Off" position.
At the end of the self clean program, you can turn
rill and griddle on again.
During the self cleaning program, grill and griddle
cannot be turned on.
This is not an error. The Safety cut-out feature has
been activated.
At 1-minute intervals, a maximum of 5ignition tests
will be performed.
Turn the grill and griddle control knob to the right
until it reaches the "Off" position.
At the end of the self clean program, you can turn
grill and griddle on again.
The rack and other
accessories make a
noise when being
pushed into or pulled
out of the oven.
The heat resistant surface of the shelf runners creates
friction when accessories are taken in and out of the
oven.
To reduce the friction, lubricate the runners with a
few drops of cooking oil applied with a paper
towel. Repeat this process after each Self Clean
program.
Loading ...
Loading ...
Loading ...