Loading ...
Loading ...
Loading ...
WHEELS AND TIRES
}}
* Option/accessory.
315
Tire sealing system–temporarily
repairing a flat tire
Temporarily repairing a flat tire is done in two
stages:
•
Stage 1: The hole is sealed by pumping
sealing compound into the tire. The car is
then driven a short distance to distribute the
sealing compound in the tire.
NOTE
Do not remove any foreign objects (nails, etc.)
from the tire before using the sealing system.
•
Stage 2: The tire’s inflation pressure is
checked and adjusted if necessary.
WARNING
•
Never leave the tire sealing system unat-
tended when it is operating.
•
Keep the tire sealing system away from
children.
•
Be sure the vehicle is parked safely off
the road and away from moving traffic.
•
Apply the parking brake.
Related information
•
Tire sealing system* – overview (p. 315)
•
Tire sealing system* – inflating tires (p. 319)
•
Tire sealing system* – sealing compound
container (p. 320)
•
Tire sealing system* – sealing a hole
(p. 317)
•
Tire sealing system – checking inflation pres-
sure (p. 319)
•
Tunnel console – 12-volt sockets (p. 136)
Tire sealing system* – overview
The vehicle is equipped with a tire sealing sys-
tem that enables you to temporarily seal a hole in
the tread surface and re-inflate a flat tire, or to
adjust a tire’s inflation pressure.
Speed limit sticker (on the rear side of the
compressor)
On/Off switch
Electrical wire
Bottle holder (orange cover)
Protective hose cover
Air release knob
Hose
Loading ...
Loading ...
Loading ...