Loading ...
Loading ...
Loading ...
||
LOCKS AND ALARM
152
Opening the remote key
The remote key has one CR 2430, 3V battery only
To open the remote key
Slide the spring loaded catch to the side.
Pull the key blade straight out of the
remote key.
Insert a small screwdriver in the hole
behind the spring loaded catch and carefully
pry up the cover. Turn the remote key with
the buttons upward so that the battery does
not fall out when the cover is removed.
Inserting a new battery
CAUTION
When handling batteries, avoid touching their
contact surfaces as this could result in poor
battery function in the remote key.
Note the position of the battery's (+) or (–) sides.
1. Use a screwdriver to pry out the old battery.
2.
Insert a new one with the (+) side downward.
Closing the remote key
1. Press the remote key's cover into place.
2. Hold the remote key with the slot for the key
blade up.
3. Carefully slide the key blade into its groove.
4. Gently press the key blade in the groove until
it clicks into place.
NOTE
Volvo recommends that the batteries used in
the remote control meet the UN Manual of
Test and Criteria, Part III, sub-section 38.3.
Batteries installed in the key from the factory
and batteries exchanged by an authorized
Volvo workshop fulfill the above criteria.
Old batteries should be disposed of properly
at a recycling center or at your Volvo retailer.
Related information
•
Remote key – functions (p. 147)
Loading ...
Loading ...
Loading ...