Loading ...
Loading ...
Loading ...
DRIVER SUPPORT
}}
179
Adaptive Cruise Control – engaging
Putting ACC in standby mode
Before ACC can be used to regulate speed
and/or the distance to a vehicle ahead, it must
first be put in standby mode.
To do so:
Controls and display
Off/On/Standby mode
•
Press
(2).
>
The same symbol (7) appears (in white) in
the instrument panel to indicate that ACC is
in standby mode.
NOTE
The driver's door must be closed and the driv-
er's seat belt must be fastened before ACC
can be put in active mode. If the driver's seat
belt is taken off or if the driver's door is
opened, ACC will return to standby mode.
Related information
•
Adaptive Cruise Control – introduction
(p. 175)
Adaptive Cruise Control – setting
speed
Setting a speed
Once ACC has been put in standby mode:
Controls and display
Put in active mode and set a speed (each
additional press increases/decreases speed
by 1 mph (approximately 2 km/h))
•
Press
or (4).
> The set speed, for example 60 mph (5), will
be magnified for several seconds and the
frame around the speed will change colors
from white to green to indicate that this
speed has been stored (set).
When this symbol has changed colors
from white to green, ACC is in active
mode and the vehicle will maintain the
set speed.
Loading ...
Loading ...
Loading ...