Loading ...
Loading ...
Loading ...
DRIVER SUPPORT
233
Activating/deactivating
The system is activated automatically when the
vehicle is started.
–
Press the Park assist button on the center
console to temporarily deactivate the sys-
tem(s).
> The indicator light in the button will go out
when the system has been deactivated.
Park assist will be automatically reactivated the
next time the engine is started, or if the button is
pressed (the indicator light in the button will illu-
minate).
NOTE
Park assist is disengaged automatically when
the parking brake is applied.
Related information
•
Park assist – introduction (p. 230)
•
Park assist – limitations (p. 233)
•
Park assist – function (p. 230)
•
Park assist – troubleshooting (p. 238)
•
Rear Park Assist Camera (PAC) – function
(p. 239)
Park assist – limitations
Cleaning the sensors
The sensors must be cleaned regularly to ensure
that they work properly. Clean them with water
and a suitable car washing detergent.
Location of the front sensors
Location of the rear sensors
Ice and snow covering the sensors may cause
incorrect warning signals.
NOTE
If the sensors are obstructed by e.g., dirt,
snow, or ice, this could result in false warning
signals from the park assist system or the
system may not function at all.
Related information
•
Park assist – introduction (p. 230)
•
Park assist – function (p. 230)
•
Park assist – operation (p. 232)
•
Park assist – troubleshooting (p. 238)
•
Rear Park Assist Camera (PAC) – function
(p. 239)
Loading ...
Loading ...
Loading ...