Loading ...
Loading ...
Loading ...
8
Assembly
BEFORE FIRST USE
Before using your juicer for the first time,
remove and safely discard any packaging
material and promotional labels. Ensure the
appliance is switched off at the power outlet
and the power cord is unplugged.
Wash the filter surround, juice disc, juicer
cover, food pusher, juice jug, juice jug lid and
pulp container in warm soapy water with
a soft cloth or nylon brush. rinse and dry
thoroughly.
1. Place the motor base on a flat dry surface
such as a bench top. Ensure that the
motor base is switched OFF at the control
panel, then switch the appliance OFF at
the power outlet and unplug the cord.
2. Place the filter bowl surround on the top of
the motor base.
3. Align the arrows on the juice disc with the
arrows on the motor drive coupling and
push down until it clicks into place. Ensure
the juice disc is fitted securely inside
the filter bowl surround and onto the motor
base.
4. Place the juicer cover over the filter bowl
surround, positioning the juicer cover over
the stainless steel filter disc and lower into
position.
5. Raise the safety locking arm up and lock
into the two grooves on either side of the
juicer cover. The safety locking arm should
now be in a vertical position and locked into
place on top of the juicer cover.
Loading ...
Loading ...
Loading ...