Loading ...
Loading ...
Loading ...
13
Care & Cleaning
Always ensure that the juicer is switched
off and that the power is switched off at the
power outlet. Then remove the plug from the
power outlet before cleaning, disassembling
or assembling and storing the appliance.
Follow these instructions to clean all
surfaces of parts that come into contact
with food during normal use.
For easy cleaning- immediately after
each use rinse removable parts under
running water. Allow parts to air dry.
After disassembling the unit, all
removable parts may be washed in hot
soapy water, then rinse well and dried.
The juice cover, filter bowl surround, pulp
container, stainless steel filter disc and 1.2L
juice jug are dishwasher safe (Top shelf only).
Wipe the motor base with a damp cloth.
For consistent juicing results always ensure
that the juice disc is thoroughly cleaned using
the supplied nylon brush. Using the nylon
washing brush, hold the juice disc under
running water and starting with the inside
of the basket, brush in a circular motion
then repeat on the outside of the mesh until
all food is removed. Hold disc up towards a
light to ensure the fine mesh holes are not
blocked. If the holes are blocked soak the
juice disc in hot water with 10% lemon juice
to loosen the blocked holes. Alternatively
wash the juice disc in the dishwasher.
Do not soak the juice extractor in bleach.
Always treat the juice extractor with
care as they can be easily damaged.
Discolouration of the plastic may
occur with strongly coloured fruit
and vegetables. To help prevent this,
wash parts immediately after use.
If discolouration does occur, the
plastic parts can be soaked in 10%
lemon juice and water or they can be
cleaned with a non abrasive cleaner.
NOTE
To assist with cleaning soak the juice
disc in hot soapy water for approximately
10 minutes immediately after juicing is
completed. If pulp is left to dry on the filter
it may clog the fine pores of the filter mesh
thereby lessening the effectiveness of the
juicer.
Loading ...
Loading ...
Loading ...