Loading ...
Loading ...
Loading ...
11
OVERLOAD PROTECTION BUTTON
The juicer is fitted with a safety device
which safeguards against overloading with
excessive loads. If this occurs, the juicer
will automatically activate the overload
protection button and the unit will switch
itself off.
If this occurs turn the power OFF at the
power outlet and allow the unit to cool.
Once cooled, press the overload protection
button found on the bottom of the motor
base. The safety device will then be reset
and the Breville juice processor is ready for
use again.
Disassembly
1. Push the START/STOP button on the
control panel of the juice processor to turn
off. Then switch the appliance OFF at the
power outlet and unplug the cord.
NOTE
The light will be illuminated for 2 minutes
before fading into sleep mode. The light
will come back on by activating any of
the controls.
2. Remove the pulp container by holding the
handle and pivoting the bottom of the pulp
container away from the juicer.
3. Place both hands on either side of the
locking arm and pull back and lift
over the grooves on either side of the juicer
cover.
4. Move the locking arm down.
Loading ...
Loading ...
Loading ...