Loading ...
Loading ...
Loading ...
7-95
7
Maintenance
Headlamp low beam (RHD side)
1. Turn the low beam on without driver aboard.
2. The cut-off line should be projected in the cut-off line shown in the picture.
3. When aiming the low beam, vertical aiming should be adjusted after adjusting the horizontal aiming.
4. If headlamp leveling device is equipped, adjust the head lamp leveling device switch with 0 positions.
W1
Low Beam)
CAR AXIS
CUT-OFF LINE
Horizontal line of head
lamp bulb center
Vertical line of the left
head lamp bulb center
Vertical line of the right head
lamp bulb center
GROUND
100±20
H1
Low beam)
OAD075072L
■ Based on 10m screen
Loading ...
Loading ...
Loading ...