Loading ...
Loading ...
Loading ...
IN CASE OF EMERGENCY 275
4. Slide the tire out from under the vehicle and
rotate it vertically behind the rear bumper.
Spare Tire
5. Pull the metal stamping toward you to
release it from the plastic plate.
Spare Tire Retainer
6. Slide the metal stamping up the steel exten-
sion tube and winch cable. Rotate the metal
stamping and push it through the hole in the
plastic plate and wheel.
Sleeve And Cable
7. Pinch the three short and two long tubes to
remove the protective plate from the steel
spare wheel.
Releasing Protective Plate
Preparations For Jacking
1. Park the vehicle on a firm, level surface as
far from the edge of the roadway as
possible. Avoid icy or slippery areas.
WARNING!
Do not attempt to change a tire on the side of
the vehicle close to moving traffic. Pull far
enough off the road to avoid being hit when
operating the jack or changing the wheel.
6
20_WD_OM_EN_USC_t.book Page 275
Loading ...
Loading ...
Loading ...