Loading ...
Loading ...
Loading ...
222 STARTING AND OPERATING
Enabling And Disabling ParkSense
ParkSense can be enabled and disabled with
the ParkSense switch.
When the ParkSense switch is pushed
to disable the system, the instrument
cluster will display the “PARKSENSE
OFF” message for approximately five
seconds. When the gear selector is moved to
REVERSE and the system is disabled, the instru-
ment cluster display will display the “PARK-
SENSE OFF” message for as long as the vehicle
is in REVERSE.
Refer to “Instrument Cluster Display” in
“Getting To Know Your Instrument Panel” for
further information.
The ParkSense switch LED will be on when Park-
Sense is disabled or requires service. The Park-
Sense switch LED will be off when the system is
enabled. If the ParkSense switch is pushed, and
the system requires service, the ParkSense
switch LED will blink momentarily, and then the
LED will be on.
Operation With A Trailer
For vehicles equipped with an Integrated Trailer
Brake Module (ITBM), the operation of the rear
sensors is automatically deactivated when the
trailer's electric plug is inserted in the vehicle's
tow hook socket. When the vehicle is connected
to a trailer, the instrument cluster display will
show the “Rear ParkSense Unavailable Trailer
Connected” message in the following situa-
tions:
For five seconds at vehicle start up
For five seconds when the ParkSense button
is pushed
As long as the vehicle is in REVERSE
NOTE:
Refer to “Towing Requirements” in “Starting
And Operating” for more information on the
Integrated Trailer Brake Module.
Service The ParkSense Rear Park Assist
System
During vehicle start up, when the ParkSense
Rear Park Assist system has detected a faulted
condition, the instrument cluster will actuate a
single chime, once per ignition cycle, and it will
display the “PARKSENSE UNAVAILABLE WIPE
REAR SENSORS” or the “PARKSENSE UNAVAIL-
ABLE SERVICE REQUIRED” message. Refer to
“Instrument Cluster Display” in “Getting To
Know Your Instrument Panel” for further infor-
mation. When the gear selector is moved to
REVERSE and the system has detected a
faulted condition, the instrument cluster display
will display the "PARKSENSE UNAVAILABLE
WIPE REAR SENSORS" or "PARKSENSE
UNAVAILABLE SERVICE REQUIRED" message
for as long as the vehicle is in REVERSE. Under
this condition, ParkSense will not operate.
If “PARKSENSE UNAVAILABLE WIPE REAR
SENSORS” appears in the instrument cluster
display make sure the outer surface and the
underside of the rear fascia/bumper is clean
and clear of snow, ice, mud, dirt or other
obstruction and then cycle the ignition. If the
message continues to appear, see an autho-
rized dealer.
20_WD_OM_EN_USC_t.book Page 222
Loading ...
Loading ...
Loading ...