Loading ...
Loading ...
Loading ...
Wall Sleeve Brands: #4 General Electric/Hotpoint 16%"Deep
RearLouvers 10'/_"
Top View
1. Redirect the louvers at the back of the wail sleeve as shown in the
illustration. The use of pliers is recommended.
2. Cut (2) 17.Tapered Spacer Blocks to 13" and install as shown in the
illustration with the tapered end ½"from the back of the sleeve.
i q _' _,_I ____
3. Cut (1) 1½"x 3/8"x 26V_"longseals to 25"long attach as shown.
Attach (2) l'½"x 3/8"x 14" long seals as shown in the illustration.
4. Attach 1 "x 3/4"x 14" long seal to the Iouvered panel as shown in the
illustration.
5. Install the new unit into the wall sleeve.
Attach the ground wire to the unit as shown.
6. Install the 1 "x 1½"x 84"long stuffer seal between the wall sleeve and the unit.
A flat bladed screwdriver or putty knife is recommended.
7, Assemble and install the Trim Frame.
(see Trim Frame)
5
Loading ...
Loading ...
Loading ...