Loading ...
Loading ...
Loading ...
CHANGING THE NEEDLE
Getting Ready
35
1
CHANGING THE NEEDLE
■ Checking the Needle
Place the flat side of the needle on a flat surface
(such as the needle plate or a piece of glass) and
check that the gap between the needle and the flat
surface is even.
a Even gap
b Flat surface (bobbin cover, glass, etc.)
a
Press the “Needle Position” button to raise
the needle.
b
Press .
→ The screen changes, and all keys and operation
buttons are locked.
CAUTION
• Always press in the operation panel before changing the needle. If is not pressed and the “Start/
Stop” button or another operation button is pressed accidentally, the machine will start and injury may result.
• Use only sewing machine needles made for home use. Other needles may bend or break and may cause injury.
• Never sew with a bent needle. A bent needle will easily break and may cause injury.
Note
Never use bent or blunt needles.
a
b
Memo
Before replacing the needle, cover the hole in the
needle plate with fabric or paper to prevent the needle
from falling into the machine.
Loading ...
Loading ...
Loading ...