Loading ...
Loading ...
Loading ...
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS
13
* Depending on the model, an alternate bobbin case
with a pink marking may be included. It can be used
in the same way as the bobbin case with no color
marking on the screw.
No. Part Name
Part Code
U.S.A./
Canada
Others
1 Embroidery foot “U” XD0313-051
2 Buttonhole foot “A” X57789-151
3 Overcasting foot “G” XC3098-051
4 Monogramming foot “N” X53840-351
5 Zipper foot “I” X59370-051
6 Zigzag foot “J” (on machine) XC3021-051
7 Blind stitch foot “R” X56409-051
8 Button fitting foot “M” 130489-001
9 Walking foot SA140 F033N:XC2214-102
10 Side cutter foot SA177 F054:XC3879-002
11 Free-motion quilting foot SA129 F005N:XC1948-002
12 Straight stitch foot XD0826-051
13 Straight stitch needle plate XC8362-051
14 Seam ripper X54243-051
15 Bobbin × 10 SA156 SFB:XA5539-151
16 Needle set X58358-051
17 Twin Needle X59296-151
18 Scissors XC1807-121
19 Chalk pen 184944-001
20 Cleaning brush X59476-051
21 Eyelet punch 135793-001
22 Screwdriver (large) XC8349-021
23 Screwdriver (small) X55468-021
24 Spool cap (small) 130013-154
25 Spool cap (medium) × 2 X55260-153
26 Spool cap (large) 130012-054
27 Vertical spool pin XC8619-051
28 Spool felt X57045-051
29 Disc-shaped screwdriver XC1074-051
30 Spool net XA5523-050
31
Embroidery frame set (medium)
10 cm (H) × 10 cm (W)
(4 inches (H) × 4 inches (W))
SA438/
EF74
EF74:XC8480-152
32
Embroidery frame set (large)
18 cm (H) × 13 cm (W)
(7 inches (H) × 5 inches (W))
SA439/
EF75
EF75:XC8481-152
33
Embroidery frame set
(extra large) 26 cm (H) × 16
cm (W) (10-1/4 inches (H) ×
6-1/4 inches (W))
SA441/
EF81
EF81:XC9763-152
34 Foot controller XC8028-051
35
Embroidery needle plate cover
XA9939-051
36 Grid sheet set SA507 GS3:X81277-151
37 Touch pen (stylus) XA9940-051
38 Knee lifter XA6941-052
39 USB cable XD0745-051
40
Alternate bobbin case
(no color on the screw
*)
(See page 141)
XC8167-451
41 Embroidery bobbin thread SA-EBT
EBT-CEN:
X81164-001
42 Stabilizer material SA519 BM3:XE0806-001
43 Operation Manual XD0954-151
44 Quick Reference Guide XD0956-051
45 Hard case XC9640-151
46 Embroidery unit carrying case SA529 D6EUC:XC9862-052
Memo
(For U.S.A. only)
Foot controller: Model S
This foot controller can be used with this
machine model NV2500D/NV2500/NV2800D.
Memo
•Always use accessories recommended for
this machine.
• The screw for the presser foot holder is
available through your authorized dealer
(part code: XA4813-051).
• This operation manual and the foot
controller can be stored in the machine’s
hard case.
Loading ...
Loading ...
Loading ...