Loading ...
Loading ...
Loading ...
11
8. The corresponding hour can now be entered by pressing the MEMORY button.
9. Press the TIME button again. The last two characters (Minutes) now blink.
10. The exact time can now be entered by pressing the MEMORY button
11. Press TIME button (or TIME / DATE or TIME): the unit of measurement will flash.
12. Press the "MEMORY to set the unit of measurement (mmHg or kPa)
13. Once you have made your settings, press the TIME button (or TIME / DATE or TIME). The
setting is confirmed and the clock starts running.
14. Now after all settings have been made, press the TIME button once again. The date is briefly
displayed and then the time. The input is now confirmed and the clock begins to run.
Further Information
With each press of the button (TIME, MEMORY) one input is made (e.g. switching over from hours to
minutes mode, or altering the value by +1). However, if you keep the respective button depressed,
you can switch more quickly to find the desired value respectively.
5. Carrying out a measurement
5.1. Before the measurement
Avoid eating, smoking as well as all forms of exertion directly before the measurement. All
these factors influence the measurement result. Try and find time to relax by sitting in an
armchair in a quite atmosphere for about ten minutes before the measurement.
Measure always on the same arm (normally left).
Attempt to carry out the measurements regularly at the same time of day, since the blood-
pressure changes during the course of the day.
5.2. Common sources of error
Note: Comparable blood-pressure measurements always require the same conditions! These are
normally always quiet conditions.
Loading ...
Loading ...
Loading ...