Loading ...
Loading ...
Loading ...
Sewing the Various Built-in Decorative Patterns
Decorative sewing D-7
CHARACTER / DECORATIVE STITCHES
D
Retrieving a pattern
a
Press once or twice until a screen of saved
patterns like the one shown below appears.
When a saved pattern is retrieved, the pocket
appears.
Realigning the pattern
The pattern may not be sewn correctly, depending on the type
of fabric being sewn or the sewing speed. If this occurs, adjust
the pattern while sewing on a piece of scrap fabric that is the
same as what is used for your project.
a
Attach monogramming foot “N”.
b
Press , and then enter “99” with the numeric keys.
c
Start sewing.
The sewing machine stops after it has finished sewing
the pattern.
d
Check the sewn pattern.
If the part of the pattern indicated in the illustration is
sewn uniformly, the pattern is correctly aligned.
If the pattern is not sewn correctly, follow the steps
below to align the stitching.
e
Press the “-” or “+” key to adjust the vertical position.
Make the necessary adjustments according to how
the pattern is sewn.
* If the pattern is bunched:
Press “+” to increase the vertical space in the design.
* If the pattern has gaps:
Press “-” to decrease the vertical space in the design.
f
Start the sewing machine and check the stitching.
Continue adjusting the pattern until it is sewn correctly.
Memo
• You can check the combined patterns. For
details, refer to “Checking the selected pattern”
on page D-6.
• To add new patterns, select the desired category,
and then enter the number of the stitch.
Memo
• To finish realigning the pattern, press , ,
or any of the numeric keys.
• After the pattern is realigned, the patterns
selected before realignment are deleted. To
retrieve the patterns selected before realignment,
press or , and then enter “00” with the
numeric keys.
Loading ...
Loading ...
Loading ...