Loading ...
Loading ...
Loading ...
Names of Machine Parts and Their Functions
B-2
The names of the various parts of the machine and their functions are described below. Before using the machine,
carefully read these descriptions to learn the names of the machine parts and their locations.
Machine
■ Front view
The appearance of the machine differs depending on the
model.
1 Top cover
Open the top cover to place the spool of thread on the spool
pin.
2 Thread guide plate
Pass the thread around the thread guide plate when threading
the upper thread.
3 Bobbin winding thread guide and pretension disk
Pass the thread under this thread guide and around the
pretension disk when winding the bobbin thread.
4 Spool cap
Use the spool cap to hold the spool of thread in place.
5 Spool pin
Place a spool of thread on the spool pin.
6 Bobbin winder
Use the bobbin winder when winding the bobbin.
7 LCD (liquid crystal display)
Settings for the selected stitch and error messages appear in
the LCD. (page B-11)
8 Operation panel
From the operation panel, stitch settings can be selected and
edited, and operations for using the machine can be selected.
(page B-5)
9 Operation buttons and sewing speed controller
Use these buttons and the slide to operate the machine.
(page B-4)
0 Flat bed attachment
Insert the presser foot accessory tray into the accessory
compartment of the flat bed attachment. Remove the flat bed
attachment when sewing cylindrical pieces such as sleeve
cuffs.
A Thread cutter
Pass the threads through the thread cutter to cut them.
B Needle threader lever
Use the needle threader lever to thread the needle.
C Thread tension dial
Use the dial to adjust the upper thread tension. (page B-39)
Chapter 1
GETTING READY
Names of Machine Parts and Their Functions
a
b
c
d
e
f
h
i
j
k
l
m
g
a
b
c
d
e
f
h
i
j
k
l
m
g
Loading ...
Loading ...
Loading ...